Unified CVP: System CLI: Command takes long time to complete
From DocWiki
System CLI command takes long time to complete
| Problem Summary | A command takes long time to complete |
|---|---|
| Error Message | No specific error message. |
| Possible Cause | The System CLI is run on a system with high load or CVP solution devices are under high load.
System CLI runs at the idle prority. That means it only uses CPU when there is available idle time. If the system is busy with other tasks, the system CLI will be CPU starve. This is by design as we do not want the System CLI to have any impact to call processing. |
| Recommended Action | Cancel the request and run the command at a time when the system load is low. |
| Release | 8.0(1) and later |
| Associated CDETS # | None. |
