Talk:Cisco Application Control Engine (ACE) Troubleshooting Guide -- Troubleshooting Redundancy

From DocWiki

Jump to: navigation, search

Hi,

Can someone help me please. Currently have HA mode enabled but there are some strange issues. 
on teh FT vlan i have the following :

vlan51 is up

 Hardware type is VLAN
 MAC address is 00:23:33:4e:43:d1
 Mode : routed
 IP address is 192.168.1.2 netmask is 255.255.255.0
 FT status is non-redundant

Within ANM for 3 of my 4 ACE modules, the HA status is unavailable. However, when i look on the ACE CLI, They are all compatible and active through heartbeats etc.

e.g.

CDFNACE02/Admin# show ft group status

FT Group  : 2 Configured Status  : in-service Maintenance mode  : MAINT_MODE_OFF My State  : FSM_FT_STATE_ACTIVE Peer State  : FSM_FT_STATE_STANDBY_HOT Peer Id  : 1 No. of Contexts  : 1

FT Group  : 3 Configured Status  : in-service Maintenance mode  : MAINT_MODE_OFF My State  : FSM_FT_STATE_ACTIVE Peer State  : FSM_FT_STATE_STANDBY_HOT Peer Id  : 1 No. of Contexts  : 1


CDFNACE02/Admin# show ft peer summary

Peer Id  : 1 State  : FSM_PEER_STATE_COMPATIBLE Maintenance mode  : MAINT_MODE_OFF FT Vlan  : 51 FT Vlan IF State  : UP My IP Addr  : 192.168.1.2 Peer IP Addr  : 192.168.1.1 Query Vlan  : 177 Query Vlan IF State  : UP Peer Query IP Addr  : 0.0.0.0 Heartbeat Interval  : 300 Heartbeat Count  : 10 SRG Compatibility  : COMPATIBLE License Compatibility  : COMPATIBLE FT Groups  : 2



CDFNACE02/Admin# show ft stats HA Heartbeat Statistics


Number of Heartbeats Sent  : 86740796 Number of Heartbeats Received  : 86740292 Number of Heartbeats Missed  : 1337 Number of Unidirectional HB's Received  : 845 Number of HB Timeout Mismatches  : 0 Num of Peer Up Events Sent  : 2 Num of Peer Down Events Sent  : 1 Successive HB's miss Intervals counter  : 0 Successive Uni HB's recv counter  : 0



Any help would be gatefuly received. I have also upgraded from ANM 2.0 to ANM 3.0 but this hasn't changed the HA state for the affected ACEs

Personal tools