Genesys T-Server: T-Server can’t connect to CTI-Server

From DocWiki

Jump to: navigation, search

T-Server can't connect to CTI-Server.

Problem Summary It appears (Maybe in the T-Server logs) that the T-Server is attempting to connect to CTI-server but is unsuccessful.
Error Message Many - Non-Specific.
Possible Cause
  • Incorrect T-Server Host/Port configuration.
  • UCCE system isn't the correct version (CTI-Server not 8.0(2) or above).
Recommended Action

Check if CTI-Server up and accepting connections (Look in the title Bar) - If not correct and retry.

Check in the CTI-Server log for an OPEN_REQ.

If none is seen check the Genesys Host/Port configuration and retry.

Check the log to see if the OPEN_REQ has a matching OPEN_CONF - If so pursue Genesys T-Server troubleshooting.

If an OPEN_REQ is seen in the CTI-Server log but a FAILURE_CONF is seen instead look at the failure reason. If a mal-formed message or invalid mask pursue T-Server troubleshooting. One reason would be if CTI-Server was pre 8.0 (CTI V14 or above and 8.0(2)+) is required.

Release Release 8.0(2)
Associated CDETS # N/A

Rating: 0.0/5 (0 votes cast)

Personal tools