General Troubleshooting: Procedure to Change IP Address of Unified CVP Server

From DocWiki

Jump to: navigation, search

General Troubleshooting: Procedure to Change the IP Address of Unified CVP Server

Problem Summary Procedure to change the IP address of Unified CVP Server
Error Message None
Possible Cause There is a requirement to change the IP address of the Unified CVP Server in the network
Recommended Action

1. Create the new device from the Operations Console. Use the original device as template. From the menu bar of the device, select the Use As Template option. Assign the new IP address to the new device and click Save. Do not select Save and Deploy since you have not changed the physical server to the new IP address.
2. Delete the device from the Operations Console before changing the IP address of the server.

3. Delete the old license from the device if a license re-hosting is required.
3. Configure the new IP address on the local server.
4. Starting with Unified CVP 10.0(1), a batch file is made available at C:\Cisco\CVP\bin\UpdateRMIServerIP\updatermiserverip.bat. Double-click the batch file to update the IP address in windows registry and wrapper.conf file.

For Unified CVP 9.0(1) and earlier releases, skip Step 4.

Note: The batch file is made available only from 10.0(1) ES 3.

5. From the Operations Console, select Save and Deploy the new device. Re-host the license if required.

6. Restart the server.

Release Release 8.x onwards
Associated CDETS # None


<Replace this entire line with the required category or categories. Add double, square brackets at the beginning and end of the category. Select a category from the previous page. Do not enter your own.>

Rating: 0.0/5 (0 votes cast)

Personal tools