General Troubleshooting: Error When Adding a Dial-Peer
From DocWiki
Error When Adding a Dial-Peer
| Problem Summary | When adding a dial-peer, an error message is issued and the dial-peer is not added. |
| Error Message | Could not add peer. |
| Possible Cause | This message implies that the amount of memory required to add the dial-peer is not available. |
| Recommended Action | Use the show memory command to verify the available free memory. If the available free memory is > 0, then the logging buffer is taking up all available memory. In this case, adjust the amount of memory used by the log buffer by changing the value of logging buffered <numeric value>. The recommended value for this setting is between 10 - 20% of the total Gateway memory. |
| Release | Release 7.0(2) |
| Associated CDETS # | None. |
