FACT show subnet-managers

From DocWiki

Jump to: navigation, search

To show all of the subnet managers in the current scan, use the show subnet-managers command.


show subnet-managers
show sm



Syntax Description

This command has no arguments or keywords.


Usage Guidelines

Unlike most commands, the show subnet-managers command works on the current scan if the scan is not complete.
The show sm command is equivalent to the show subnet-managers command.


Examples

The following example shows the subnet manager in the current scan. Host01 is the master Subnet Manager, and switchA and switchB are standby Subnet Managers:
 fact> show subnet-managers
 
 subnet-prefix           master                  standby  (* for non-active)
 ----------------------- ----------------------- ---------------------------
 fe:80:00:00:00:00:00:00 host01                  switchA
                                                 switchB
                                                 switchC  *



Related Commands

scan fabric
show isolated managed-nodes

Rating: 0.0/5 (0 votes cast)

Personal tools