FACT show multicast egress ports
From DocWiki
To show the egress ports that forward multicast traffic to each specified destination port, use the show multicast egress ports command.
- show multicast egress ports [chassis | chip] [to multicast-groups] [guids]
Syntax Description
chassis (Optional) Shows only switch chassis egress ports. chip (Optional) Shows only the egress ports for each InfiniBand switch chip. to (Optional) Identifies the destination set. multicast-groups (Optional) Shows only the egress ports to the specified multicast groups. guids (Optional) Shows device GUIDs.
Command Default
- The default view is the chassis view. If multicast-groups is not specified, egress ports for all multicast destinations are shown.
Examples
- The following is sample output from the show multicast egress ports command, and it shows the egress ports used for each multicast group:
fact> show multicast egress ports MGID ff:12:40:1b:ff:ff:00:00:00:00:00:00:00:00:00:01, lid 49153: egress-port -------------------------------- switchB/1/7 MGID ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, lid 49152: egress-port -------------------------------- switchB/1/7 MGID ff:18:a0:1b:00:00:00:00:00:00:05:ad:00:02:80:da, lid 49154: none found
Related Commands
