FACT show multicast destinations
From DocWiki
To show the multicast destinations that are forwarded through each specified egress port, use the show multicast destinations command.
- show multicast destinations [switches | ports] [to multicast-groups]
Syntax Description
switches (Optional) Shows only the destinations from the specified switch ports. ports (Optional) Shows only the destinations from the specified ports. to (Optional) Identifies the destination multicast group set. multicast-groups (Optional) Shows only the destinations for the specified multicast groups.
Command Default
- If no port is specified, the default view is the port view. If multicast-groups is not specified, all multicast destinations forwarded through each specified egress ports are shown.
Examples
- The followingis sample output from the show multicast destinations command, and it shows all multicast destinations that egress chip switchB/1:1 through port 7:
fact> show multicast destinations switchB/1:1/7 Egress port switchB/1/7: mgid mlid ----------------------------------------------- ----- ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff 49152 ff:12:40:1b:ff:ff:00:00:00:00:00:00:00:00:00:01 49153
Related Commands
