FACT show counters threshold
From DocWiki
To display the monitored port counters, use the show counters threshold command.
- show counters threshold [chassis | chips | ports] [error]
Syntax Description
chassis (Optional) Displays only the counters for the ports in the specified chassis. chips (Optional) Displays only the counters for the ports in the specified chips. ports (Optional) Displays only the counters for the specified ports. error (Optional) Displays only those counters that are both error counters and non-zero counters. Some counters, such as xmit-pkts, count non-error events. These counters are not shown.
Command Default
- No default behavior or values.
Usage Guidelines
- If the current scan does not include threshold port counters, then this command fails.
Examples
- The following is sample output from the show counters threshold command, and it shows all counters in the subnet that have exceeded their error thresholds:
fact> show counters threshold port counter value ------------------------------ ----------------------------- ------------ port: switchB/1/3 symbol_errors 65535 ngbr: switchA/1/3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - port: switchB/1/6 symbol_errors 65535 ngbr: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Related Commands
