FACT show counters raw

From DocWiki

Jump to: navigation, search


To display the raw port counters, use the show counters raw command.


show counters raw [chassis | chips | ports] [error]



Syntax Description

chassis (Optional) Displays only the counters for the ports in the specified chassis.
chips (Optional) Displays only the counters for the ports in the specified chips.
ports (Optional) Displays only the counters for the specified ports.
error (Optional) Displays only those counters that are both error counters and non-zero counters. Some counters, such as xmit-pkts, count non-error events. These counters are not shown.



Command Default

No default behavior or values.


Usage Guidelines

If the current scan does not include raw port counters, then this command fails.
FACT does not display information for ports that have zero error counters only.


Examples

The following is sample output from the show counters raw command, and it shows all the non-zero raw counters in the subnet. Errors have occurred on host01/1/1, switchB/1/3, switchB/1/6, and switchB/1/7. Three of the four ports have neighbors (ngbr), and switch switchB/1/6 does not have a neighbor. The example also lists the names and values of the non-zero counters.
  fact> show counters raw error
  
  port                           counter                              value
  ------------------------------ ----------------------------- ------------
  port: host01/1/1               xmit_discards                            3
  ngbr: switchB/1/7              vl15_droppeds                            7
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 
  port: switchB/1/3              symbol_errors                        65535
  ngbr: switchA/1/3              link_downs                               3
                                 xmit_discards                           13
                                 xmit_constraint_errors                  13
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 
  port: switchB/1/6              symbol_errors                        65535
  ngbr:                          link_downs                               1
                                 xmit_discards                           50
                                 xmit_constraint_errors                  50
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 
  port: switchB/1/7              rcv_switch_relay_errors                  3
  ngbr: host01/1/1
  - - - - - - - - - - - - - - -  - - - - - - - - - - - - - - -  - - - - - - 


Related Commands

scan fabric
scan fabric all
show counters monitored
show counters threshold
reset port-counters

Rating: 0.0/5 (0 votes cast)

Personal tools