FACT show chips

From DocWiki

Jump to: navigation, search

To show information about switch chips in the current scan, use the show chips command.

show chassis [chassis | chips] [summary | guids | detail | full]

Syntax Description

chassis (Optional) Shows all chips in the specified chassis (one ore more chassis).
chips (Optional) Specifies which chip to view.
summary (Optional) Shows a one-line summary of each chip.
guids (Optional) Shows a one-line summary and the node GUID of each chassis.
detail (Optional) Shows the most important details about each chip.
full (Optional) Shows full details about each chip.

Command Default

The default view is the summary view, which shows all chips in the current scan.

Usage Guidelines

If there is no current scan or the current scan is incomplete, using the show chips command automatically performs a fabric scan.


The following is sample output from the show chips command, and it shows all the chips in the current scan:
  fact> show chips
  node-name                   type   slot description
  --------------------------- ------ ---- ----------------------------------------
  host01/1:1                  CA        1 kbob-host.cisco.com HCA-1 (Topspin DDR-HCAe MF)
  switchA/1:1                 switch    1 Topspin Switch - U1
  switchA/1:2                 switch    1 Topspin Switch - U2
  switchA/1:3                 switch    1 Topspin Switch - U3
  switchB/1:1                 switch    1 Cisco Switch SFS7000D

Related Commands

show chassis
show ports
show multicast groups
scan fabric

Rating: 0.0/5 (0 votes cast)

Personal tools