FACT scan fabric
To scan the static connectivity of the subnet and collect information from and about the Subnet Managers, use the scan fabric command.
- scan fabric [routes] [raw-counters] [monitored-counters] [threshold-counters] [subnet-manager | sm managed-node]
routes (Optional) Collects routing information from the master Subnet Manager. raw-counters (Optional) Collects raw port counters from the master Subnet Manager. monitored-counters (Optional) Collects monitored port counters from the master Subnet Manager. threshold-counters (Optional) Collects threshold-exceeded port counters. subnet-manager (Optional) Overrides the discovered master Subnet Manager. sm (Optional) Overrides the discovered master Subnet Manager. managed-node (Optional) Scans the configured managed-nodes.
- No default behavior or values.
- The scan will fail if the specified managed-node is not a master Subnet Manager.
- The following example shows scanning the fabric and also collecting route information and raw port counter information:
fact> scan fabric routes raw-counters Scanning host01 Scanning switchA Scanning switchB Scanning Master Subnet Manager at host01