Configuration: Adding too many Incoming Call Configurations causes timeouts.
== Configuration: Adding or deleting an incoming call configuration causes a timeout error message, though the configuration succeeds eventually.
|Problem Summary||When adding or deleting an incoming call configuration, a timeout message appears for the current addition or deletion. This occurs if there are a large number of existing incoming call configurations. In addition, a timeout may occur if any other configuration change is saved after adding or deleting an incoming call configuration which is still processing.|
|Error Message||For 9.1 and 10.x: Request timed out. Check back later.|
|Possible Cause||If there are a large number of existing incoming call configurations, then adding or deleting an incoming call configuration takes a few minutes to complete. This causes a timeout message for further updates to incoming call rules, as well as changes to any other configuration settings.|
|Recommended Action|| To save a new incoming call configuration, click the Save button. If it takes more than 5 seconds, the timeout message appears with an error indication. However, the Save operation runs in the background and succeeds in less than a minute.
To delete an incoming call configuration, select the record and click the Delete button. If it takes more than 5 seconds, the timeout message appears with an error indication. However, the Delete operation runs in the background and succeeds in less than a minute.
When adding or deleting a large number of incoming call configurations, review the list after several transactions to ensure they are being processed as expected.
Wait for all incoming call configuration changes to complete before making additional configuration changes.
|Release||9.1 and 10.x|
|Associated CDETS #||CSCut19424|
<Replace this entire line with the required category or categories. Add double, square brackets at the beginning and end of the category. Select a category from the previous page. Do not enter your own.>