Cisco Unified Presence, Release 7.x -- set network status CLI Command

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified Presence, Release 7.x

Contents

Previous Topic

This command sets the status of Ethernet 0 to up or down. You cannot configure Ethernet interface 1.


Command Syntax

set network status eth0 {up | down}


Parameters
  • eth0 specifies Ethernet interface 0.


Usage Guidelines

The system asks whether you want to continue to execute this command.

Caution! If you continue, the system will temporarily lose network connectivity.


Requirements

Command privilege level: 1

Allowed during upgrade: No

Rating: 0.0/5 (0 votes cast)

Personal tools