Cisco Unified Presence, Release 7.x -- set network ip CLI Command

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified Presence, Release 7.x

Contents

Previous Topic

Caution! Cisco Unified Presence does not support changing the IP address. If you change the IP address, Cisco Unified Presence may not function properly.

This command sets the IP address for Ethernet interface 0. You cannot configure Ethernet interface 1.


Command Syntax

set network ip eth0 ip-address ip-mask


Parameters
  • eth0 specifies Ethernet interface 0.
  • ip-address represents the IP address that you want assign.
  • ip-mask represents the IP mask that you want to assign.


Usage Guidelines

The system asks whether you want to continue to execute this command.

Caution! If you continue, this command causes the system to restart.


Requirements

Command privilege level: 1

Allowed during upgrade: No

Rating: 0.0/5 (0 votes cast)

Personal tools