Cisco Unified Presence, Release 7.x -- set network gateway CLI Command

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified Presence, Release 7.x

Contents

Previous Topic

This command enables you to configure the IP address of the network gateway.


Command Syntax

set network gateway ip-address


Parameters
  • ip-address represents the IP address of the network gateway that you want to assign.


Usage Guidelines

The system asks whether you want to continue to execute this command.

Caution! If you continue, this command causes the system to restart.


Requirements

Command privilege level: 1


Allowed during upgrade: No

Rating: 0.0/5 (0 votes cast)

Personal tools