Cisco Unified Presence, Release 7.x -- How to Configure Cisco Unified Presence for Integration with Microsoft OCS

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified Presence, Release 7.x

Contents

Previous Topic





Configuring the Service Parameters

The SIP message routing from Cisco Unified Presence to Microsoft Office Communicator is based on the Record-Route header added by Microsoft OCS in the initial request. Cisco Unified Presence resolves the hostname in the Record-Route header to an IP address and routes the SIP messages to the Microsoft Office Communicator client.


In addition the transport type on Cisco Unified Presence should be the same as the transport type configured on Microsoft OCS for the Cisco Unified Presence route (either TLS or TCP respectively).


Procedure
  1. Select Cisco Unified Presence Administration > System > Service Parameters.
  2. Select the Cisco Unified Presence server,
  3. Select the service Cisco UP SIP Proxy.
  4. Verify that the following parameters are configured correctly:
    • The Proxy Domain parameter value must define the enterprise top-level domain name (e.g. "example.com"). This parameter specifies which URIs are treated as local and handled by this Cisco Unified Presence installation. Other SIP requests may be proxied.
    • Enable the Add Record-Route Header parameter.
    • Enable the Use Transport in Record-Route Header parameter.
    • The SIP Route Header Transport Type parameter value must be set to the same type as the transport parameter configured on Microsoft OCS for the Microsoft OCS to Cisco Unified Presence route.
  5. Select Save.


What To Do Next

Configuring an Incoming Access Control List



Configuring an Incoming Access Control List

Procedure
  1. Select Cisco Unified Presence Administration > System > Security > Incoming ACL.
  2. Select Add New.
  3. Enter a description in the Description field.
  4. Enter IP address, host name, or Fully Qualified Domain Name (FQDN) of the associated Microsoft OCS server in the Address Pattern field.
  5. Select Save.


What To Do Next

Configuring the Routing Settings



Configuring the Routing Settings

Procedure
  1. Select Cisco Unified Presence Administration > Presence > Routing > Settings.
  2. Select On for Method/Event Routing Status.
  3. Select Default Cisco SIP Proxy TCP Listener for the Preferred Proxy Server.
  4. Select Save.


What To Do Next

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Cisco_Unified_Presence,_Release_7.x_--_How_to_Configure_Cisco_Unified_Presence_for_Integration_with_Microsoft_OCS"
Personal tools