Cisco Unified Presence, Release 7.x -- How to Configure Cisco IP PhoneMessenger on Cisco Unified Communications Manager

Main page: Cisco Unified Presence, Release 7.x

Configuring Cisco IP PhoneMessenger as an Application User

Select Cisco Unified Communications Manager Administration > User Management > Application User.
Select Add New.
Enter an application username in the User ID field, for example, PhoneMessenger.
Enter a password for this application user, and confirm the password.
Select the devices that you want the application user to control.
Select Save.

Configure Cisco IP PhoneMessenger as an application user on Cisco Unified Communications Manager.

Select Cisco Unified Communications Manager Administration > Device > Device Settings > Phone Services.
Select Add New.
Enter PhoneMessenger in the Service Name field.
Enter IP Phone Messenger in the Service Description field.
Enter this URL in the Service URL field:
http://my-cups:8081/ippm/default?name=#DEVICENAME#
where my-cups specifies the IP address of the Cisco Unified Presence unless DNS is enabled on the phone.
Select XML Service from the Service Category menu.
Select Standard IP Phone Service from the Service Type menu.
Check Enable.
Select Save.

Configure a Phone Service for Cisco IP PhoneMessenger on Cisco Unified Communications Manager.

Select Cisco Unified Communications Manager Administration > Device > Phone.
Select Find.
Select a phone device link to access the Phone Configuration window.
Select Subscribe/Unsubscribe Services from the menu in the Related Links navigation box at the top right of the window.
Select Go.
Select PhoneMessenger from the Select a Service menu in the Subscribed Cisco IP Phone Services window.
Select Next.
Select Subscribe when the window displays again.
Select Save when the window displays again.
Reset the phones individually or as a group.

Rating: 5.0/5 (1 vote cast)