Cisco Unified MeetingPlace Express, Release 2.x -- Field Reference: H.323 Configuration

H.323 enabled

Whether H.323 is enabled.

Note the following:

• If this field is set to No, incoming H.323 calls cannot be received.
• It takes about one minute to bring up the service after enabling H.323. While the H.323 service is coming up, H.323 calls will not work.
• To use H.323 for outgoing calls, see the Field Reference: Dial Configuration.

Yes/No

Default: Yes

E.164 address

Phone number of the Cisco Unified MeetingPlace Express server.

If Cisco Unified MeetingPlace Express uses H.323 to dial out to a Cisco Unified IP Phone, this number appears on the Cisco Unified IP Phone screen.

This field must match the phone number configured in the call-control device to route calls to Cisco Unified MeetingPlace Express.

Up to 24 digits

Default: 0000

H.323 ID

Alias used to identify the Cisco Unified MeetingPlace Express server as an H.323 endpoint.

If a user calls Cisco Unified MeetingPlace Express from a Cisco Unified IP Phone, the H.323 ID appears on the Cisco Unified IP Phone screen.

Restriction: Do not leave this field blank.

Up to 128 characters

Default: Cisco Unified MeetingPlace Express

Local H.323 port

TCP or UDP port used for incoming H.323 calls to Cisco Unified MeetingPlace Express.

Restriction: This field must be set to TCP port 1720.

The following port settings are automatically configured on Cisco Unified MeetingPlace Express and cannot be modified:

• UDP port 1719 is used for Registration Admission Status (RAS) signaling to a gatekeeper.
• TCP port 1720 is used for outgoing H.323 calls from Cisco Unified MeetingPlace Express.

1720 (Do not modify)

Default: 1720

Use gatekeeper

Whether to use a gatekeeper, which can be used for address resolution, call routing, and bandwidth control.

For Cisco Unified Communications Manager or Cisco Unified CallManager integration, this field must be set to No.

Yes/No

Default: No

Gatekeeper

Gatekeeper IP address. Enter the decimal value of one octet in each field.

Note: If you select No for the Use gatekeeper field, these fields are inactive.

Range: 0 to 255

Default: 0

H.323 gateway 1

IP address of the H.323 gateway, which connects the IP network with the public switched telephone network (PSTN).

Enter the decimal value of one octet in each field.

For Cisco Unified Communications Manager or Cisco Unified CallManager integration, this field must contain the IP address of the Cisco Unified Communications Manager or Cisco Unified CallManager server.

Range: 0 to 255

Default: 0

H.323 gateway 2

H.323 gateway 3

H.323 gateway 4

H.323 gateway 5

IP address of an optional failover H.323 gateway.

Enter the decimal value of one octet in each field.

Range: 0 to 255

Default: 0