Cisco Unified MeetingPlace, Release 7.0 -- How to View General Information for the Media Server

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0



Contents

Accessing the Basics Tab

Procedure
  1. Do one of the following, in the MSA interface sidebar:
    • Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
    • Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
  2. Click the Basics tab.
    Table: Cisco Unified MeetingPlace 3545 Media Server Basics Tab Elements describes the elements that appear in the Basics tab for the Media Server.


Note: The descriptions listed are for the Cisco Unified MeetingPlace 3545 Media Server. The descriptions in brackets are for the Cisco Unified MeetingPlace 3515 Media Server.


Table: Cisco Unified MeetingPlace 3545 Media Server Basics Tab Elements
Field Description

Board [Device] name

Model number of the board [device].

Location

User-configured description about the board [device].

Slot number

Cisco Unified MeetingPlace 3545 Media Server only: Number of the cPCI slot in the Cisco Unified MeetingPlace 3545 Media Server chassis in which this Audio Blade is inserted.

Serial number

Serial number that the factory assigned to the board [device].

Hardware version

Version number of the current hardware configuration.

Software version

First two digits of the version number of the software installed on the board [device].

Date/Time

Date and time that the Audio Blade [Cisco Unified MeetingPlace 3515 Media Server] clock reports.



Viewing Software Version Details

Procedure
  1. Do one of the following, in the MSA interface sidebar:
    • Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
    • Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
  2. Click the Basics tab.
  3. Click Details....
    The system displays the Version Details window.



Setting the Media Server Location

You can install the Media Server anywhere on your network including on a remote site. You can describe the current location of the Media Server from the Basics tab.


Procedure
  1. Do one of the following, in the MSA interface sidebar:
    • Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
    • Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
  2. Click the Basics tab.
  3. Enter the location information about the Media Server that you want to display in the Location field.
    The field displays up to 23 characters.
  4. Click Upload.

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace,_Release_7.0_--_How_to_View_General_Information_for_the_Media_Server"
Personal tools