Cisco Unified MeetingPlace, Release 7.0 -- How to Switch the Order of IP Addresses on the Web Server

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Configuration




Based on the NIC binding order, the system assigns the first IP address to the Hostname [Web Conferencing] and the second IP address to the Hostname [Home Page].


Note: If you ever change an IP address to a hostname or FQDN, be sure that you replace it with the hostname or FQDN corresponding to that IP address. Do not switch the order of the IP addresses or hostnames as this will cause problems.


If you want to switch the order of the IP addresses, complete the following in the order presented. Select the first or second topic based on your system configuration:



Contents

Changing the Binding Order for a System with One IP Address on Each NIC

Complete this procedure if you have one IP address on each NIC. If you do not, complete Changing the Binding Order for a System with Two IP Addresses on One NIC instead.


Procedure
  1. On the Start menu, click Settings > Control Panel > Network Connections.
  2. Click Advanced > Advanced Settings.
  3. Change the order of the IP addresses/NICs by using the up and down arrows.


What to Do Next

Proceed to Making the Change in the Application.


Changing the Binding Order for a System with Two IP Addresses on One NIC

Complete this procedure if you have two IP addresses on a single NIC. If you do not, complete Changing the Binding Order for a System with One IP Address on Each NIC instead.


Procedure
  1. Change the primary IP address to the virtual IP address.
  2. Change the virtual IP address to the primary IP address.


What to Do Next

Proceed to Making the Change in the Application.




Making the Change in the Application

Before You Begin

Depending on your system, complete one of the following:


Procedure
  1. Sign in to the end-user web interface.
  2. Click Admin > Web Server.
  3. From the "View" section of the page, click the name of the web server that you want to configure.
    This populates the "Edit" section of the page with predefined settings.
  4. Change the order of the IP addresses for the Hostname [Web Conferencing] and the Hostname [Home Page].
  5. Restart all Cisco Unified MeetingPlace Web Conferencing services.

NOTE: When you restart the Web Server, all manual changes made to the registry are lost.

Rating: 0.0/5 (0 votes cast)

Personal tools