Cisco Unified MeetingPlace, Release 7.0 -- How to Manually Synchronize the Web Server with an NTP Server

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Configuration




Complete the following procedures in the order shown.


Note: We recommend that all components in a Cisco Unified MeetingPlace system use the Application Server as their NTP time source.




Contents

Querying Which NTP Server You Are Using

Procedure
  1. Open a DOS command window.
  2. Enter the following command: net time /querysntp


What to Do Next

Proceed to Setting the NTP Server.



Setting the NTP Server

Procedure
  1. Open a DOS command window.
  2. Enter the following command: net time /setsntp:<xyz> where <xyz> is the IP address or hostname of the NTP server.


What to Do Next

Proceed to Checking the Delta Between the Local PC Clock and the NTP Server.



Checking the Delta Between the Local PC Clock and the NTP Server

Before You Begin
  • Make sure that the Windows Time Service in the Services Control Panel is started.


Procedure
  1. Open a DOS command window.
  2. Enter the following command: w32tm /monitor /computers:<xyz> where <xyz> is an NTP source.


What to Do Next

Proceed to Manually Synchronizing the Web Server with the NTP Server.



Manually Synchronizing the Web Server with the NTP Server

Before You Begin
  • Make sure that the Windows Time Service in the Services Control Panel is started.


Procedure
  1. Open a DOS command window.
  2. Enter the following command: w32tm /resync

Rating: 3.0/5 (1 vote cast)

Personal tools