Cisco Unified MeetingPlace, Release 7.0 -- How to Enable SMA After an Upgrade

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0

Navigation: Configuration > Configuring External Access to Cisco Unified MeetingPlace Web Conferencing




Contents

Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL)

Before You Begin

This task applies to the following Cisco Unified MeetingPlace releases:

  • Release 7.0
  • Release 7.1


Procedure

  1. Sign in to the end-user web interface on the internal Web Server.
  2. Click Admin.
  3. Assign your primary external web server to the DMZ Web Server field on the Admin page.
    1. Return to the main Administration page and click Site.
    2. Click the Site Name that represents your internal web server.
    3. Select the primary external web server.
      This configures the internal web server to point to this external web server in the case of external meetings.
    4. Click Submit.



Enabling SMA on a Deployment with One Internal and One External Web Server (with SSL)

Before You Begin

This task applies to the following Cisco Unified MeetingPlace releases:

  • Release 7.0
  • Release 7.1


Procedure

  1. Enable SMA on an internal web server Admin page.
    Complete the steps in Enabling SMA on a Deployment with One Internal and One External Web Server (no SSL).
  2. Toggle SSL to ON on the internal Cisco Unified MeetingPlace web server.
    Complete the steps in Toggling On SSL on the Internal Web Server.
  3. Toggle SSL to ON on the external Cisco Unified MeetingPlace web server.
    Complete the steps in Toggling On SSL on the External Web Server.



Enabling SMA on a Deployment with Multiple Internal and External Web Servers (no SSL)

Before You Begin

  • This task applies to load balancing deployments without SSL configuration.
  • This task applies to the following Cisco Unified MeetingPlace releases:
    • Release 7.0
    • Release 7.1


Procedure

  1. Sign in to the end-user web interface on any internal web server that is part of your load balancing configuration.
  2. Click Admin.
  3. Click Site.
  4. Click the Site Name that represents your cluster of internal web servers.
  5. Select the primary external web server.
    This configures the internal web servers in this cluster to point to this external web server in the case of external meetings.
  6. Click Submit.



Enabling SMA on a Deployment with Multiple Internal and External Web Servers (with SSL)

Before You Begin

  • This task applies to load balancing deployments with SSL configured.
  • This task applies to the following Cisco Unified MeetingPlace releases:
    • Release 7.0
    • Release 7.1


Procedure

  1. Enable SMA from any internal web server that is part of your load balancing configuration.
    Complete the steps in Enabling SMA on a Deployment with Multiple Internal and External Web Servers (no SSL).
  2. Toggle SSL to ON on all internal Cisco Unified MeetingPlace web servers.
  3. Reboot all internal web servers.
  4. Toggle SSL to ON on all external Cisco Unified MeetingPlace web servers.
  5. Reboot all external web servers.

Rating: 0.0/5 (0 votes cast)

Personal tools