Cisco Unified MeetingPlace, Release 7.0 -- How to Configure Security for the Media Server

From DocWiki

Jump to: navigation, search

Main page: Cisco Unified MeetingPlace, Release 7.0



Contents

Changing the MSA Interface Web Server Port

The default MSA web server port is port 80. For additional security, you can modify the web server port on the Web tab.


Caution! We do not recommend that you change this port. If you change the port, the "Go To MCU..." button will not work in the Media Server Administration.


Procedure
  1. Do one of the following, in the MSA interface sidebar:
    • Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
    • Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
  2. Click the Web tab.
  3. Enter the port number in the Web server port field.
  4. Click Upload.



Changing the SNMP Values

Procedure
  1. Do one of the following, in the MSA interface sidebar:
    • Click Board (for a Cisco Unified MeetingPlace 3545 Media Server).
    • Click Device (for a Cisco Unified MeetingPlace 3515 Media Server).
  2. Click the Security tab.
  3. Enter default strings used to enable SNMP communication between the Media Server and an external application such as the Cisco Upload Utility in the SNMP Read community and Write community fields.
    Note: If you change these SNMP settings, those same settings must be applied in the MSA resource management section for that Audio Blade; otherwise, Cisco Unified MeetingPlace cannot connect to that Audio Blade.
  4. Click Upload.

Rating: 0.0/5 (0 votes cast)

Personal tools