Cisco Unified MeetingPlace, Release 7.0 -- Configuring the Find Me Dial-Out Feature

Main page: Cisco Unified MeetingPlace, Release 7.0

Up one level: Configuration

1. Log in to the Administration Center.

2. Click User Configuration.

3. Configure user groups:

a. Click User Groups.

b. To configure an existing user group, click Edit. To configure a new user group, click Add New.

c. Configure these fields:

User Group Field	Value
Phone number for non-direct-dial pagers	(Required only for non-direct dial pagers) Phone number to access the pager system
Can call out from meetings	(Optional) Yes
Ask for profile password	(Optional) Yes

d. Click Save.

e. Repeat Step 3 for all user groups for which you want to configure the Find Me feature.

4. Configure user profiles:

a. Click User Profiles.

b. To configure an existing user profile, click Edit. To configure a new user profile, click Add New.

c. Configure these fields:

User Profile Field	Value
Group name	(Required only for non-direct dial pagers) User group configured in Step 3 with the correct Phone number for non-direct-dial pagers.
Main phone number Alternate phone number Pager number and Pager type	Configure at least one phone or pager number. If you select Non-direct dial pager in Pager type, enter the PIN or user ID for the individual pager in the Pager number field.
Method of attending	Have system find user
Search order for find me	Order in which the system should attempt to call the user
Can call out from meetings	Yes or Group Default (Yes)
Ask for profile password	(Optional) Yes or Group Default (Yes)

d. Click Save.

e. Repeat Step 4 for all user profiles for which you want to configure the Find Me feature.

5. (Optional) Configure the system dial-out settings:

a. Click System Configuration > Usage Configuration.

b. Configure these fields:

c. Click Save.