Cisco Unified MeetingPlace, Release 7.0 -- Add User Group Page
From DocWiki
Main page: Cisco Unified MeetingPlace, Release 7.0
Up one level: Reference Information
To find this page, click User Configuration > User Groups > Add New.
Note: Most user group fields are identical to user profile fields. Therefore, Table: Field Reference: Add User Group Page and Edit User Group Page describes only the fields that are specific to user groups. For descriptions of all other user group fields, see Table: Field Reference: Add User Profile Page and Edit User Profile Page, Table: Field Reference: Add User Profile Page and Edit User Profile Page.
Table: Field Reference: Add User Group Page and Edit User Group Page
| Field | Description |
|---|---|
|
Name |
Name by which you want to identify the user group.
|
|
Number |
Number used to identify this user group. |
|
Phone number for non-direct-dial pagers |
Shared phone number for a non-direct-dial pager system.1
|
| All other user group fields are described in Table: Field Reference: Add User Profile Page and Edit User Profile Page, Table: Field Reference: Add User Profile Page and Edit User Profile Page. | |
Footnote 1: The required format for phone numbers is determined by the call-control device for your IP telephony network. Therefore, enter phone numbers in the same format used to dial similar numbers from a phone on the same IP telephony network as Cisco Unified MeetingPlace. For example, if calls within your company are made by dialing the last four digits of a phone number, then enter only the last four digits in Cisco Unified MeetingPlace for internal phone numbers. If, however, you want Cisco Unified MeetingPlace to call a phone in a different area code, then you may need to include 91 and the complete telephone number including the area code.
