Cisco Unified MeetingPlace, Release 7.0 -- Add SNMP Community String Page
From DocWiki
Main page: Cisco Unified MeetingPlace, Release 7.0
Up one level: Reference Information
To find this page, click Maintenance > SNMP > Community Strings > Add New.
Table: Field Reference: Add SNMP Community String Page and Edit SNMP Community String Page
| Field | Description |
|---|---|
|
Community string |
Name of the SNMP community string.
|
|
Accept SNMP packets from any host |
Allows the SNMP community string to accept SNMP packets from any host. |
|
Accept SNMP packets only from these hosts |
Allows the SNMP community string to accept SNMP packets only from hosts that you specify. |
|
Host IP address |
If you choose the Accept SNMP packets only from these hosts radio button, enter an IP address and click Insert to allow the SNMP community string to accept SNMP packets from this host. |
|
Host IP addresses |
If you choose the Accept SNMP packets only from these hosts radio button, this field lists all hosts from which this SNMP community string can accept SNMP packets. To remove a host from this list, highlight the IP address and click Remove. |
|
Access privileges |
The access privilege given to this SNMP community string. Access privileges provide security by restricting the ability to alter the Cisco Unified MeetingPlace system. |
