Cisco Unified MeetingPlace, Release 6.x -- Worksheet 5-13: Server Configuration

From DocWiki

Jump to: navigation, search

Cisco Unified MeetingPlace, Release 6.x > Cisco Unified MeetingPlace Audio Server > Planning the installation > Database Planning Worksheets



In the Server Configuration window you enter the Cisco Unified MeetingPlace network addresses for your system.


Use this worksheet to plan the server configuration fields.


Caution! Entering incorrect information in the Network Parameters window can make the system inaccessible from the network. Make sure you enter all the information correctly.


Remember the following information:

  • For Options and Field Size values, in most cases the numeric and alphanumeric ranges given are the number of acceptable digits or characters for the field. (For example, Numeric-0 to 9 means that the field accepts any number between 0 (or nil) and 999999999.) Ranges with an asterisk (*) mean that the field accepts an actual number that falls within that range. (For example, Numeric-1 to 32767* means that the field accepts the value 3102 but not 32769.)
  • Cisco Unified MeetingPlace Audio Server is not aware of DNS. You cannot ping hostnames or use DNS hostnames for configuration.


Field Description Default Options and Field Size Value

Server number

Identifies the server. As a standalone system, the Cisco Unified MeetingPlace 8106 or 8112 server is always defined as server number 0 .

Predefined

Numeric-0 to 8

 

Type of unit

Identifies the system as a conference server or Cisco Unified MeetingPlace integration.

Predefined

Conference Server/ MeetingPlace Gateway

 

Server hostname

Host name of this Cisco Unified MeetingPlace server on your network.

-

Alphanumeric- 1 to 32

 

Server description

Descriptive name of this Cisco Unified MeetingPlace server.

-

Alphanumeric- 0 to 32

 

Is active?

Whether this server is currently active.

Yes

Yes/No

 

Flex Menus active?

Whether Flex Menus are currently active.

No

Yes/No

 

Ethernet address

Ethernet address of this server. This value is defined by the installation partner when your Cisco Unified MeetingPlace system is physically installed.

-

-

 

IP address

Address of Cisco Unified MeetingPlace host on the network.

-

Dotted decimal format, as in 198.207.208.1

 

System serial #

Cisco Unified MeetingPlace serial number. Default information shipped with your Cisco Unified MeetingPlace system.

Predefined

This field cannot be changed

N/A

Modem phone number

Phone number for Cisco Unified MeetingPlace service modem on your system or remote maintenance port.

-

Alphanumeric- 0 to 31

 

Call out if network disconnects?

Determines if conference server should dial attendant when server is disconnected from network server.

Predefined

Yes/No

 

Access ports

Number of ports on this server used to schedule new meetings and listen to recorded meetings.

-

-

 

Conference ports

Total number of ports on this server, including floater and contingency ports.

-

-

 

Contingency ports

Number of conference ports held in reserve to let people reach a contact or attendant during meetings.


Recommended: 1-2 of conference ports on the system.

1

Numeric-0 to 32

 

Floater ports

Number of ports reserved as floater ports. Floater ports can be used by any meeting to accommodate unanticipated additional attendees.


Recommended: 15% of total conference ports.

2

Minimum 0; maximum cannot exceed number of conference ports in your system.

 

Overbook ports

Number of ports to allow for scheduling meetings that exceed the number of available conference ports on system.


Recommended: A number less than or equal to number of floater ports.


(See notes after this worksheet.)

0

Numeric- 0 to 1200*

 

Max recording space (min)

Total recording time (in minutes) that can be used to record meetings.


Recommended: 80% to 85% of total minutes of recording space.

0

Numeric- 0 to 85332*

 

Voice encoding method

The voice encoding method for the system.

Predefined

Mu-Law encoding A-Law encoding

 

RFC2833 payload type

Identifies which packets in the IP voice stream contain digit information, such as, user keypresses.

101

Numeric- 96 to 127

 



For the Overbook Ports field, remember the following information:

  • Cisco Unified MeetingPlace uses the following calculation:
      Number of conference port licenses installed
    - Number of floater ports
    - Number of contingency ports
    + Number of overbook ports
    _________________________________________
    = Maximum number of ports that can be scheduled
  • On a system with both reservationless and scheduled meetings, use the following guidelines to configure your system. These guidelines maximize the port utilization and capacity of your system:
    If R<50%
    • Immediate meetings: 3
    • Overbook ports: N x 30%
    • Floater ports: N x 30%
    If R>=50%
    • Immediate meetings:0
    • Overbook ports: N x 15%
    • Floater ports: N x (R + 25%)
[R = percentage of traffic used for reservationless meetings; N = total number of conference ports including capacity assurance (CAP); 30% can be substituted for standard operating percentage.]
  • On a system with reservationless only meetings, use the following guidelines to configure your system. These guidelines maximize the port utilization and capacity of your system.
    If R = 100%
    • Immediate meetings: 4
    • Overbook ports: N
    • Floater ports: N
[R = % of traffic used for reservationless meetings; N = total number of conference ports including capacity assurance (CAP).]
  • Make sure the total number of scheduling ports available (including overbook ports) is equal to or greater than the largest meeting size you anticipate scheduling. For a new system, these guidelines are good defaults, but keep the current settings for a system that is already configured.

Rating: 0.0/5 (0 votes cast)

Personal tools