Cisco IOS Voice Troubleshooting and Monitoring -- MGCP Connections and Endpoints Verification
From DocWiki
To verify MGCP-controlled endpoints configured for SS7 and ISDN PRI, use the show mgcp endpoint command in privileged EXEC mode.
| Note: | The show mgcp endpoint command does not show configured endpoints for CAS, including FGD-OS. |
The following example shows MGCP endpoints for a NAS package:
controller T3 9/0 framing m23 cablelength 224 t1 1-8 controller ! controller T1 9/0:1 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb mf dnis ! controller T1 9/0:2 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb dtmf dnis ! controller T1 9/0:3 framing esf ds0-group 0 timeslots 1-24 type e&m-immediate-start ! controller T1 9/0:4 framing esf ds0-group 0 timeslots 1-24 type e&m-fgb ! controller T1 9/0:5 framing esf pri-group timeslots 1-24 service mgcp ! controller T1 9/0:6 framing esf ds0-group 0 timeslots 1-24 type none service mgcp ! controller T1 9/0:7 framing esf extsig mgcp guard-timer 10 on-expiry reject pri-group timeslots 1-24 service mgcp ! controller T1 9/0:8 framing esf extsig mgcp guard-timer 10 on-expiry reject ds0-group 0 timeslots 1-24 type none service mgcp !
The following output shows available varieties of CAS:
- 9/0:5-ISDN backhauling
- 9/0:6-SS7
- 9/0:7-ISDN backhauling with NAS package
- 9/0:8-SS7 with NAS package
slot7# show mgcp endpoint T1 S9/0:5 pri-group timeslots 1-23 type backhaul T1 S9/0:6 ds0-group 0 timeslots 1-24 type none T1 S9/0:7 pri-group timeslots 1-23 type backhaul T1 S9/0:8 ds0-group 0 timeslots 1-24 type none NAS Endpts T1 9/0:7 ds0-group 0 timeslots 1-24 type none T1 9/0:8 ds0-group 0 timeslots 1-24 type none slot7#
