Your call cannot be completed as dialed. Please consult your directory and call again, or ask your operator for assistance.

From DocWiki

Revision as of 18:55, 12 September 2012 by Dosproul (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Problem Summary

NA

Error Message

Your call cannot be completed as dialed. Please consult your directory and call again, or ask your operator for assistance.

Possible Cause

NA

Recommended Action

Check the following:

  • You may have dialed the wrong number. Be sure you dialed the number you configured for the exercise.
  • Using sh run examine the voice gateway's running configuration file. Be sure there is a dial-peer defined for the number you called.
  • For VoIP calls, be sure you have created the proper route pattern in Communications Manager for the dial number you used. Refer to Define the Route Patterns.
Release

NA

Associated CDETS #

None.

Back: Troubleshooting Tips for Getting Started with CVP

Rating: 3.0/5 (2 votes cast)

Personal tools