Voice gateway debug commands and log files
m (1 revision)
Latest revision as of 18:55, 12 September 2012
This section provides information about using and interpreting the voice gateway debug commands.
Note: The following commands are entered on the gateway's command line through a Telnet session, unless you are directly connected to the gateway.
|Description of Command or Issue
||Command to Use or Suggestion Regarding Issue
|Turn off all debug logging.
||no debug all
| Clear the gateways' debug logs so that you will have only fresh information related to a call issue.
| Add back specific logging.
|| Commands to add back specific logging:
|Example Log message received: **CVP**85C28020C56C11DD800ED5D4E76F3954**helloworld**ERROR: 10.86.132.141, CVP VXML Server emergency error occurred such as an invalid application. Call is dropped.
||Check the application definition in the gateway configuration. Be sure the name of the application is entered exactly as the application is actually spelled.
For example: HelloWorld, and customhelloworld
|You receive a URL in the log file.
||Try copying the URL information and pasting it into your browser. The browser should display additional information.