Virtualization for Unified Intelligence Center

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (1 revision)
 
(2 intermediate revisions not shown)
Line 10: Line 10:
| November 20, 2010  
| November 20, 2010  
| Initial version of virtualization information for Cisco Unified Intelligence Center.
| Initial version of virtualization information for Cisco Unified Intelligence Center.
 +
|-
 +
| July 18, 2013
 +
| Qualification of ESXi 5.1 for Cisco Unified Intelligence Center 9.x and above.
 +
|-
|}
|}
= Information for Partners about Unified Intelligence Center Deployment Certification and Ordering  =
= Information for Partners about Unified Intelligence Center Deployment Certification and Ordering  =
-
'''It is important that partners who are planning to sell UCS products on Unified Intelligence Center, read the [[Unified Contact Center Enterprise]] DocWiki page.'''  
+
'''It is important that partners who are planning to sell UCS products on Unified Intelligence Center, read the [[Unified Contact Center Enterprise]] DocWiki page'''.
This page contains essential information for partners about the following:  
This page contains essential information for partners about the following:  
Line 28: Line 32:
== Virtual Machine(VM)-Specific Unified Intelligence Center Hardware Requirements  ==
== Virtual Machine(VM)-Specific Unified Intelligence Center Hardware Requirements  ==
-
Starting with Release 8.0(3), virtualization of Unified Intelligence Center on Cisco Unified Computing Systems (UCS) B200 Series and C210 Series hardware is supported on the following reference configurations:  
+
Virtualization of Unified Intelligence Center on Cisco Unified Computing Systems (UCS) C-Series hardware is supported on the following reference configurations:  
-
*Unified Intelligence Center is supported with Unified CCE on UCS B-Series solution B200-M1 (UCS-B200M1-VCS1) and B200-M2(UCS-B200M2-VCS1)
+
*UCS C-Series C210-M1 Reference Configuration 1 (UCS-C210M1-VCD1) and Reference Configuration 2 (UCS-C210M1-VCD2)  
-
*UCS C-Series C210-M1 Reference Configuration 1(UCS-C210M1-VCD1) and Reference Configuration 2 (UCS-C210M1-VCD2)  
+
*UCS C-Series C210-M2 Reference Configuration 1 and Reference Configuration 2  
*UCS C-Series C210-M2 Reference Configuration 1 and Reference Configuration 2  
-
*Additionally, Unified Intelligence Center 9.0(1) is supported over UCS C-Series C260-M2 server
+
*Unified Intelligence Center 9.X and 10.0(1) are also supported over UCS C-Series C260-M2 server
-
 
+
-
= UCS Hardware Requirements  =
+
-
 
+
-
Requirements for Cisco Unified Contact Center Enterprise systems using UCS B200 M1 hardware are located [http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#B-200_M1_Requirements here].
+
-
 
+
-
Requirements for Cisco Unified Contact Center Enterprise systems using UCS C210 M1 hardware are located [http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware#C-210_M1_Requirements here].
+
= VMware and Application Software Requirements  =
= VMware and Application Software Requirements  =
Line 51: Line 48:
|-
|-
| Unified Intelligence Center 8.0(x)<br>
| Unified Intelligence Center 8.0(x)<br>
-
| VMWare ESXi 4.0; minimum supported is version 4.0U1.<br>
+
| VMWare ESXi 4.0; minimum version 4.0U1.<br>
|-
|-
-
| Unified Intelligence Center 8.5(x)<br>
+
| Unified Intelligence Center 8.5(2)<br>
| VMWare ESXi 4.0; the minimum supported version is 4.0U1.<br>
| VMWare ESXi 4.0; the minimum supported version is 4.0U1.<br>
|-
|-
-
| Unified Intelligence Center 9.x(x)<br>
+
| Unified Intelligence Center 8.5(3)<br>
-
| VMWare ESXi 4.0, 4.1, and 5.0; the minimum supported version is 4.0U1.<br>
+
| VMWare ESXi 4.0 or 4.1; the minimum supported version is 4.0U1.<br>
 +
|-
 +
| Unified Intelligence Center 8.5(4)<br>
 +
| VMWare ESXi 4.0 or 4.1; the minimum supported version is 4.0U1.<br>
 +
|-
 +
| Unified Intelligence Center 9.0(1) and 9.0(2)<br>
 +
| VMWare ESXi 5.0.<br>
 +
|-
 +
| Unified Intelligence Center 9.1(1) and 10.x<br>
 +
| VMWare ESXi 5.0 and 5.1.<br>
|}
|}
Line 63: Line 69:
*For Unified Intelligence Center Release 8.5(2), 8.5(3), and 8.5(4), if you want to ensure that the version of VMware Tools matches the version of the ESX host, then download and install the "COP file for upgrading Virtual Machine Tools (Applicable for Unified Intelligence Center 8.5(2) and later)" file from the [http://www.cisco.com/cisco/software/type.html?mdfid=282163829&flowid=5228 Software download page].  
*For Unified Intelligence Center Release 8.5(2), 8.5(3), and 8.5(4), if you want to ensure that the version of VMware Tools matches the version of the ESX host, then download and install the "COP file for upgrading Virtual Machine Tools (Applicable for Unified Intelligence Center 8.5(2) and later)" file from the [http://www.cisco.com/cisco/software/type.html?mdfid=282163829&flowid=5228 Software download page].  
-
*For Unified Intelligence Center Release 9.0(1), 9.0(2), and 9.1(1) if you want to upgrade to ESXi 5.0 version before installing Unified Intelligence Center, you can follow the procedures mentioned in VMWARE [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2005102 knowledge base].  
+
*For Unified Intelligence Center Release 9.0(1) and 9.0(2), if you want to upgrade to ESXi version 5.0 before installing Unified Intelligence Center, you can follow the procedures mentioned in VMWARE [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2005102 knowledge base].
-
*Informix, and other third party software requirements for the Unified Intelligence Center applications in the ESXi/UCS platform are the same as in the physical server. For such information, refer to the Hardware and System Software Specification for Unified Intelligence Center available in the ''Hardware and System Software Specification (Bill of Materials) Guide'' at [http://www.cisco.com/en/US/products/ps9755/products_user_guide_list.html].
+
*For Unified Intelligence Center Release 9.x and above, if you want to upgrade to ESXi version 5.1 before installing Unified Intelligence Center, you can follow the procedures mentioned in VMWARE [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2032756 ESXi 5.1 best practices for upgrade].  
 +
*Informix, and other third party software requirements for the Unified Intelligence Center applications in the ESXi/UCS platform are the same as in the physical server. For such information, refer to the Hardware and System Software Specification for Unified Intelligence Center available in the ''Hardware and System Software Specification (Bill of Materials) Guide'' at [http://www.cisco.com/en/US/products/ps9755/products_implementation_design_guides_list.html].
See [[Unified Communications VMWare Requirements]] for more information.  
See [[Unified Communications VMWare Requirements]] for more information.  
Line 70: Line 77:
== Configuring the ESXi Host Network for the Virtual Machines  ==
== Configuring the ESXi Host Network for the Virtual Machines  ==
-
To configure the network for VMs, you create a virtual switch connected to an Ethernet port on the server, and then associate the virtual machine's network adapter to this virtual switch. To Add a vSwitch  
+
To configure the network for VMs, you create a virtual switch connected to an Ethernet port on the server, and then associate the virtual machine's network adapter to this virtual switch. To add a vSwitch, do the following:
-
#Login to the ESXi host using VMware Infrastructure Client  
+
#Log in to the ESXi host using VMware Infrastructure Client.
-
#Select the ESXi host  
+
#Select the ESXi host.
-
#Click on the Configuration tab  
+
#Click the '''Configuration''' tab.
-
#Click on Hardware/Networking  
+
#Click '''Hardware/Networking'''.
-
#Click on Add Networking...  
+
#Click '''Add Networking'''.  
-
#Select Connection Types: Virtual Machine. Click Next.  
+
#Select Connection Types: Virtual Machine. Click '''Next'''.  
#Select "Create a virtual switch" and select an associated VM NIC.  
#Select "Create a virtual switch" and select an associated VM NIC.  
#Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")  
#Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")  
-
#Click on Finish.
+
#Click '''Finish'''.
-
To Associate a VM Network Adapter to Network Connection  
+
To Associate a VM Network Adapter to Network Connection, do the following:
#Edit virtual machine settings.  
#Edit virtual machine settings.  
#Select the Network Adapter.  
#Select the Network Adapter.  
#Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")  
#Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")  
-
#Click OK.  
+
#Click '''OK'''.  
-
#Click on Hardware/Networking  
+
#Click '''Hardware/Networking'''.
-
#Click on Add Networking...  
+
#Click '''Add Networking'''.  
-
#Select Connection Types: Virtual Machine. Click Next.  
+
#Select Connection Types: Virtual Machine. Click '''Next'''.  
#Select "Create a virtual switch" and select an associated VM NIC.  
#Select "Create a virtual switch" and select an associated VM NIC.  
#Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")  
#Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")  
-
#Click on Finish.
+
#Click '''Finish'''.
-
To Associate a VM Network Adapter to Network Connection  
+
To Associate a VM Network Adapter to Network Connection, do the following:
#Edit virtual machine settings.  
#Edit virtual machine settings.  
#Select the Network Adapter.  
#Select the Network Adapter.  
#Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")  
#Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")  
-
#Click OK.
+
#Click '''OK'''.
-
 
+
-
== B-Series Considerations  ==
+
-
 
+
-
When deploying Clustering Over the WAN with B-Series hardware, use of the Cisco UCS M81KR Virtual Interface Card is mandatory.
+
-
 
+
-
New B-Series deployments using Clustering Over the WAN must use a Nexus 7000 Series / Nexus 5000 Series vPC infrastructure, or a Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720-10G.
+
-
 
+
-
See the configuration guidelines for UCS B-Series Network Configuration at [[Unified Communications VMWare Requirements]] .  
+
== C-Series Considerations  ==
== C-Series Considerations  ==
Line 114: Line 113:
If deploying Clustering Over the WAN with C-Series hardware, do not trunk public and private networks. You must use separate physical interfaces off of the C-Series servers to create the public and private connections. See the configuration guidelines below.  
If deploying Clustering Over the WAN with C-Series hardware, do not trunk public and private networks. You must use separate physical interfaces off of the C-Series servers to create the public and private connections. See the configuration guidelines below.  
-
=== Cisco Unified Intelligence Center on C-Series Network Configuration  ===
+
=== Unified Intelligence Center on C-Series Network Configuration  ===
-
This section provides instructions on performing the network configuration needed to deploy Cisco Unified Contact Center Enterprise (Unified CCE) on UCS C-Series servers.  
+
This section provides instructions on performing the network configuration needed to deploy Cisco Unified Contact Center Enterprise (Unified CCE) on UCS C-Series servers.
-
=== Network Requirements for C-210 M1 Servers  ===
+
=== Network Requirements for C-Series Servers  ===
-
When you install ESXi 4.0, connect the VMKernel port for the ESX Management Network to the virtual switch that is connected to the public network.  
+
When you install ESXi 5.0 and 5.1, connect the VMKernel port for the ESX Management Network to the virtual switch that is connected to the public network.  
-
During the ESXi 4.0 installation, be sure to enable the second Network Interface Card so you can use it to connect to the private network.  
+
During the ESXi 5.0 and 5.1 installation, be sure to enable the second Network Interface Card so you can use it to connect to the private network.  
-
You are required to configure the Unified Intelligence Center public and private networks on the C-210 M1 servers the same as on the MCS servers.  
+
You are required to configure the Unified Intelligence Center public and private networks on the C-Series servers the same as on the MCS servers.  
To configure the network for the VMs using the vSphere client, do the following:  
To configure the network for the VMs using the vSphere client, do the following:  
Line 134: Line 133:
<br>
<br>
-
== Installing Cisco Unified Intelligence Center components on Virtual Machines  ==
+
== Installing Unified Intelligence Center components on Virtual Machines  ==
Follow the steps and references below to install OR migrate the Unified Intelligence Center components on Virtual Machines.  
Follow the steps and references below to install OR migrate the Unified Intelligence Center components on Virtual Machines.  
-
#Install setup and configure the UCS Hardware  
+
#Install setup and configure the UCS Hardware.
#Configure the UCS Network. Follow the link UCS Network Configuration.  
#Configure the UCS Network. Follow the link UCS Network Configuration.  
-
#Install and Boot VMWare ESXi. Refer to the following installation guide:  
+
#Install and Boot VMWare ESXi. See the following installation guide:  
-
#*[http://www.cisco.com/en/US/partner/products/ps10280/prod_installation_guides_list.html Cisco UCS B-Series Blade Servers VMware Installation Guide.]
+
#*[http://www.cisco.com/en/US/products/ps10493/prod_installation_guides_list.html Cisco UCS C-Series VMware Installation Guide.]
#*[http://www.cisco.com/en/US/products/ps10493/prod_installation_guides_list.html Cisco UCS C-Series VMware Installation Guide.]
-
#Create the Cisco Unified Intelligence Center Virtual Machines from the OVA template. OVA templates are available [http://www.cisco.com/cisco/software/release.html?mdfid=282163829&flowid=5228&softwareid=282377062| on Cisco.com.]
+
#Create the Unified Intelligence Center Virtual Machines from the OVA template. OVA templates are available at:  [http://www.cisco.com/cisco/software/release.html?mdfid=282163829&flowid=5228&softwareid=282377062| Cisco.com.]
= Creating Virtual Machines from OVA VM Template  =
= Creating Virtual Machines from OVA VM Template  =
Line 153: Line 151:
=== Downloading OVA Template  ===
=== Downloading OVA Template  ===
-
:*Proceed to the [http://www.cisco.com/cisco/software/release.html?mdfid=282163829&softwareid=282377062 Cisco download page].
+
#Proceed to the [http://www.cisco.com/cisco/software/release.html?mdfid=282163829&softwareid=282377062 Cisco download page].
-
:*To download a OVA file, click the '''Download File''' button next to that file. click the '''Add to Cart''' button next to file, then click on the '''Download Cart''' link. A Download Cart page appears.
+
#To download a OVA file, click the '''Download File''' button next to that file.  
-
:*Click the '''Proceed with Download''' button on this page. A Software License Agreement page appears.
+
#Click the '''Add to Cart''' button and then click the '''Download Cart''' link. A Download Cart page appears.
-
:*Read the Software License Agreement, then click the '''Agree''' button
+
#Click the '''Proceed with Download''' button on this page. A Software License Agreement page appears.
-
:*On the next page, click on either the '''Download Manager''' link (requires Java) or the '''Non Java Download Option''' link. A new browser window appears.
+
#Read the Software License Agreement and click the '''Agree'''.
-
:*If you selected Download Manager, a Select Location dialog box appears. Specify the location where you want to save the file, and click '''Open''' to save the file to your local machine.
+
#Click either the '''Download Manager''' link (requires Java) or the '''Non Java Download Option''' link in the next window. A new browser window appears.
-
:*If you selected Non Java Download Option, click the '''Download''' link on the new browser window. Specify the location and save the file to your local machine.
+
#If you select '''Download Manager''' option, a Select Location dialog box appears. Specify the location where you want to save the file, and click '''Open''' to save the file to your local machine.
 +
 
 +
#If you select '''Non Java Download''' option, click the '''Download''' link in the new browser window. Specify the location and save the file to your local machine.
=== Creating Virtual Machines by Deploying the OVA Templates  ===
=== Creating Virtual Machines by Deploying the OVA Templates  ===
Line 172: Line 172:
#Highlight the host or cluster to which you wish the VM to be deployed.  
#Highlight the host or cluster to which you wish the VM to be deployed.  
-
#Select File &gt; Deploy OVF Template.  
+
#Select '''File &gt; Deploy OVF Template'''.  
-
#Click the Deploy from File radio button and specify the name and location of the file you downloaded in the previous section OR click the Deploy from URL radio button and specify the complete URL in the field, then click Next.  
+
#Click the '''Deploy from File''' radio button and specify the name and location of the file you downloaded in the previous section OR click the '''Deploy from URL''' radio button and specify the complete URL in the field, then click '''Next'''.  
-
#Verify the details of the template, and click Next.  
+
#Verify the details of the template, and click '''Next'''.  
-
#Give the VM you are about to create a name, and choose an inventory location on your host, then click Next.  
+
#Give the VM you are about to create a name, and choose an inventory location on your host, then click '''Next'''.  
-
#Choose the datastore on which you would like the VM to reside - be sure there is sufficient free space to accommodate the new VM, then click Next.  
+
#Choose the datastore on which you would like the VM to reside - be sure there is sufficient free space to accommodate the new VM, then click '''Next'''.  
-
#Choose a virtual network for the VM, then click Next.  
+
#Choose a virtual network for the VM, then click '''Next'''.  
-
#Verify the deployment settings, then click Finish.
+
#Verify the deployment settings, then click '''Finish'''.
{{note |  
{{note |  
-
* VM CPU affinity is not supported. You don't need to set CPU affinity for the VMs that are running Cisco Unified Intelligence Center applications on the VMware ESXi on UCS platform.
+
* VM CPU affinity is not supported. You don't need to set CPU affinity for the VMs that are running Unified Intelligence Center applications on the VMware ESXi on UCS platform.
-
* VM resource Reservation - VM resource reservation is not supported for the VMs that are running Cisco Unified Intelligence Center applications on the VMware ESXi on UCS platform. The VM computing resources should have a default reservation setting, which is no resource reservations.
+
* VM resource Reservation - VM resource reservation is not supported for the VMs that are running Unified Intelligence Center applications on the VMware ESXi on UCS platform. The VM computing resources should have a default reservation setting, which is no resource reservations.
* You cannot change the computing resource configuration of your VM at any time.
* You cannot change the computing resource configuration of your VM at any time.
* You can never go below the minimum VM computing resource requirements as defined in the OVA templates.
* You can never go below the minimum VM computing resource requirements as defined in the OVA templates.
-
* ESXi Server hyperthread is enabled by default.}}  
+
* ESXi Server hyperthread is enabled by default.}}
== Unified Intelligence Center Component Capacities and VM Configuration Requirements  ==
== Unified Intelligence Center Component Capacities and VM Configuration Requirements  ==
-
This table shows the supported Unified Intelligence Center components, their capacities, and the VM computing resource requirements. You must use the OVA virtual machine templates to create the Cisco Unified Intelligence Center component VMs.  
+
This table shows the supported Unified Intelligence Center components, their capacities, and the VM computing resource requirements. You must use the OVA virtual machine templates to create the Unified Intelligence Center component VMs.  
{| style="width: 680px; height: 102px" border="1" cellpadding="2"
{| style="width: 680px; height: 102px" border="1" cellpadding="2"
Line 208: Line 208:
| 1  
| 1  
|  
|  
-
CUIC_Reporting_200_v1.0_vmv7.ova
+
For release:
-
CUIC_852_OVA.ova, cuic_9.0_vmv8_v2.1.ova <br>
+
*8.x - CUIC_852_OVA.ova  
 +
*9.x - cuic_9.0_vmv8_v2.1.ova  
 +
*10.x - CUIC_10.0.1_vmv8_v2.2
<br>
<br>
Line 218: Line 220:
== Unified Intelligence Center Component Co-Residency  ==
== Unified Intelligence Center Component Co-Residency  ==
-
*You can have one or more Cisco Unified Intelligence Center VMs co-residing on the same ESXi server, however you must follow the rules described below:
+
You can have one or more Unified Intelligence Center VMs co-residing on the same ESXi server, however you must follow the rules described below.
-
*You must not have CPU overcommitted on the ESXi server that is running Cisco Unified Intelligence Center application. The total number of CPUs among all the virtual machines on an ESXi host must not greater than the total number of CPUs available on the ESXi server. In the case of the Cisco UCS B-200 M1, the total number of CPUs available is 8.
+
*You must not have CPU overcommitted on the ESXi server that is running Unified Intelligence Center application. The total number of CPUs among all the virtual machines on an ESXi host must not greater than the total number of CPUs available on the ESXi server.
-
*You must not have memory overcommitted on the ESXi host that is running UC realtime applications. You must allocate minimum 6 GB of memory for the ESXi kernel. For example, if an ESXi server on B-200 M1 hardware has 36 GB of memory, after you allocate 2 GB for the ESXi kernel, you have 34 GB available for the virtual machines. The total memory allocated for all the virtual machines on an ESXi server must not be greater than 34 GB in this case.
+
*You must not have memory overcommitted on the ESXi host that is running UC realtime applications. You must allocate minimum 6 GB of memory for the ESXi kernel.  
<br>
<br>
-
== Performance Requirements  ==
+
== IOPS and Storage System Performance Requirements  ==
*CPU usage (average) should not exceed 60% for the ESXi Server and for each of the individual processors, and for each VM.  
*CPU usage (average) should not exceed 60% for the ESXi Server and for each of the individual processors, and for each VM.  
*Memory usage (average) should not exceed 80%x for the ESXi Server and for each of the VMs.  
*Memory usage (average) should not exceed 80%x for the ESXi Server and for each of the VMs.  
-
*VM snapshots are not supported in production since they have significant impact on system performance.  
+
*VM snapshots are not supported in production since they have significant impact on system performance.
-
*The SAN must be able to handle the following Cisco Unified Intelligence Center application disk I/O characteristics.
+
*Enable hyper threading on all ESXi servers.
*Enable hyper threading on all ESXi servers.
 +
*The SAN must be able to handle the following Cisco Unified Intelligence Center application disk I/O characteristics:
-
Details Write (Kilobytes/Sec) Read (Kilobytes/Sec) IOPS Maximum 7758.00 466.00 781.40 95 Percentile 6446.30 433.10 628.34 Average 5727.44 74.32 460.17 Minimum 4897.00 0.00 288.75  
+
{| cellspacing="1" cellpadding="1" border="1" style="width: 439px; height: 129px"
 +
|-
 +
| Details<br>
 +
| Write (Kilobytes/Sec) <br>
 +
| Read (Kilobytes/Sec) <br>
 +
| IOPS <br>
 +
|-
 +
| Maximum <br>
 +
| 7758.00<br>
 +
| 466.00 <br>
 +
| 781.40 <br>
 +
|-
 +
| 95 Percentile <br>
 +
| 6446.30 <br>
 +
| 433.10 <br>
 +
| 628.34<br>
 +
|-
 +
| Average&nbsp; <br>
 +
| 5727.44<br>
 +
| 74.32<br>
 +
| 460.17 <br>
 +
|-
 +
| Minimum&nbsp; <br>
 +
| 4897.00<br>
 +
| 0.00<br>
 +
| 288.75 <br>
 +
|}
== Installation  ==
== Installation  ==
Line 240: Line 268:
The VMware Tools must be installed on each of the VMs and all of the VMware Tools default settings should be used. Refer to the [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003806|http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003806 VMware documentation] for instructions on installing or upgrading VMware Tools on the VM with Windows operating system.  
The VMware Tools must be installed on each of the VMs and all of the VMware Tools default settings should be used. Refer to the [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003806|http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003806 VMware documentation] for instructions on installing or upgrading VMware Tools on the VM with Windows operating system.  
-
== Installing Cisco Unified Intelligence Center Components on Virtual Machines  ==
+
== Installing Unified Intelligence Center Components on Virtual Machines  ==
-
You can install the Cisco Unified Intelligence Center components after the configuration of the VMs. Installation of these Cisco Unified Intelligence Center components on a VM is the same as the installation of these components on physical hardware. Refer to the [http://www.cisco.com/en/US/products/ps9755/prod_installation_guides_list.html ''Unified Intelligence Center Install Guide''] for the steps to install Unified Intelligence Center components.  
+
You can install the Unified Intelligence Center components after the configuration of the VMs. Installation of these Unified Intelligence Center components on a VM is the same as the installation of these components on physical hardware. See the [http://www.cisco.com/en/US/products/ps9755/prod_installation_guides_list.html ''Installation and Upgrade Guide for Cisco Unified Intelligence Center''] for the steps to install Unified Intelligence Center components.
== Migrating  ==
== Migrating  ==
-
*You can upgrade/migrate the Unified Intelligence Center components from physical hardware or another virtual machine after the configuration of the VMs. Upgrade/Migration of these Unified Intelligence Center software components to a VM is the same as the migration of these components to new physical hardware
+
*You can upgrade or migrate the Unified Intelligence Center components from physical hardware or another virtual machine after the configuration of the VMs. Upgrade or Migration of these Unified Intelligence Center software components to a VM is the same as the migration of these components to new physical hardware
-
*Refer to the [http://www.cisco.com/en/US/products/ps9755/prod_installation_guides_list.html ''Unified Intelligence Center Install Guide''] for the steps to install Intelligence Center components.
+
*Refer to the [http://www.cisco.com/en/US/products/ps9755/prod_installation_guides_list.html ''Installation and Upgrade Guide for Cisco Unified Intelligence Center''] for the steps to install Intelligence Center components.
 +
*To migrate to VMWare ESXi version 5.1 for Cisco Unified Intelligence Center 10.0(1), ensure that you migrate the ESXi server to 5.1 first. Next, upgrade the Unified Intelligence Center installation to 10.0(1).
<br>
<br>
----
----
-
 
-
Back to [[Unified Communications Virtualization]]
 
[[Category:Unified_Intelligence_Suite]]
[[Category:Unified_Intelligence_Suite]]

Latest revision as of 10:08, 19 December 2013

Contents

Updates to this Page

The following is a list of significant updates to this page:

Date Update
November 20, 2010 Initial version of virtualization information for Cisco Unified Intelligence Center.
July 18, 2013 Qualification of ESXi 5.1 for Cisco Unified Intelligence Center 9.x and above.

Information for Partners about Unified Intelligence Center Deployment Certification and Ordering

It is important that partners who are planning to sell UCS products on Unified Intelligence Center, read the Unified Contact Center Enterprise DocWiki page.

This page contains essential information for partners about the following:

  • Partner Certification Requirements
  • UCS Server Ordering Information
  • Important Notes on Cisco UCS Service and Support

Unified Intelligence Center Details for VMWare Requirements

See Unified Communications VMWare Requirements for supported/non-supported VMware features with Unified Intelligence Center.

Virtual Machine(VM)-Specific Unified Intelligence Center Hardware Requirements

Virtualization of Unified Intelligence Center on Cisco Unified Computing Systems (UCS) C-Series hardware is supported on the following reference configurations:

  • UCS C-Series C210-M1 Reference Configuration 1 (UCS-C210M1-VCD1) and Reference Configuration 2 (UCS-C210M1-VCD2)
  • UCS C-Series C210-M2 Reference Configuration 1 and Reference Configuration 2
  • Unified Intelligence Center 9.X and 10.0(1) are also supported over UCS C-Series C260-M2 server

VMware and Application Software Requirements

The following software requirements apply specifically to Unified Intelligence Center:

Unified Intelligence Center Release
VMware version
Unified Intelligence Center 8.0(x)
VMWare ESXi 4.0; minimum version 4.0U1.
Unified Intelligence Center 8.5(2)
VMWare ESXi 4.0; the minimum supported version is 4.0U1.
Unified Intelligence Center 8.5(3)
VMWare ESXi 4.0 or 4.1; the minimum supported version is 4.0U1.
Unified Intelligence Center 8.5(4)
VMWare ESXi 4.0 or 4.1; the minimum supported version is 4.0U1.
Unified Intelligence Center 9.0(1) and 9.0(2)
VMWare ESXi 5.0.
Unified Intelligence Center 9.1(1) and 10.x
VMWare ESXi 5.0 and 5.1.


  • For Unified Intelligence Center Release 8.5(2), 8.5(3), and 8.5(4), if you want to ensure that the version of VMware Tools matches the version of the ESX host, then download and install the "COP file for upgrading Virtual Machine Tools (Applicable for Unified Intelligence Center 8.5(2) and later)" file from the Software download page.
  • For Unified Intelligence Center Release 9.0(1) and 9.0(2), if you want to upgrade to ESXi version 5.0 before installing Unified Intelligence Center, you can follow the procedures mentioned in VMWARE knowledge base.
  • For Unified Intelligence Center Release 9.x and above, if you want to upgrade to ESXi version 5.1 before installing Unified Intelligence Center, you can follow the procedures mentioned in VMWARE ESXi 5.1 best practices for upgrade.
  • Informix, and other third party software requirements for the Unified Intelligence Center applications in the ESXi/UCS platform are the same as in the physical server. For such information, refer to the Hardware and System Software Specification for Unified Intelligence Center available in the Hardware and System Software Specification (Bill of Materials) Guide at [1].

See Unified Communications VMWare Requirements for more information.

Configuring the ESXi Host Network for the Virtual Machines

To configure the network for VMs, you create a virtual switch connected to an Ethernet port on the server, and then associate the virtual machine's network adapter to this virtual switch. To add a vSwitch, do the following:

  1. Log in to the ESXi host using VMware Infrastructure Client.
  2. Select the ESXi host.
  3. Click the Configuration tab.
  4. Click Hardware/Networking.
  5. Click Add Networking.
  6. Select Connection Types: Virtual Machine. Click Next.
  7. Select "Create a virtual switch" and select an associated VM NIC.
  8. Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")
  9. Click Finish.

To Associate a VM Network Adapter to Network Connection, do the following:

  1. Edit virtual machine settings.
  2. Select the Network Adapter.
  3. Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")
  4. Click OK.
  5. Click Hardware/Networking.
  6. Click Add Networking.
  7. Select Connection Types: Virtual Machine. Click Next.
  8. Select "Create a virtual switch" and select an associated VM NIC.
  9. Enter Port Group Properties/Network label: VM Network n, where n is an integer.(Example: "VM Network 1")
  10. Click Finish.

To Associate a VM Network Adapter to Network Connection, do the following:

  1. Edit virtual machine settings.
  2. Select the Network Adapter.
  3. Select a virtual switch from the Network Connection/network label. (Example: "VM Network 1")
  4. Click OK.

C-Series Considerations

If deploying Clustering Over the WAN with C-Series hardware, do not trunk public and private networks. You must use separate physical interfaces off of the C-Series servers to create the public and private connections. See the configuration guidelines below.

Unified Intelligence Center on C-Series Network Configuration

This section provides instructions on performing the network configuration needed to deploy Cisco Unified Contact Center Enterprise (Unified CCE) on UCS C-Series servers.

Network Requirements for C-Series Servers

When you install ESXi 5.0 and 5.1, connect the VMKernel port for the ESX Management Network to the virtual switch that is connected to the public network.

During the ESXi 5.0 and 5.1 installation, be sure to enable the second Network Interface Card so you can use it to connect to the private network.

You are required to configure the Unified Intelligence Center public and private networks on the C-Series servers the same as on the MCS servers.

To configure the network for the VMs using the vSphere client, do the following:

  1. Create a virtual switch connected to a 1GB physical port on the server.
  2. Connect this physical port to the public network, and associate the virtual machine's network adapter to this virtual switch.
  3. You need to do the same for the private network as required by Cisco Unified Intelligence Service components, such as Cisco Unified Intelligence Center Reporting server and OAMP.


Installing Unified Intelligence Center components on Virtual Machines

Follow the steps and references below to install OR migrate the Unified Intelligence Center components on Virtual Machines.

  1. Install setup and configure the UCS Hardware.
  2. Configure the UCS Network. Follow the link UCS Network Configuration.
  3. Install and Boot VMWare ESXi. See the following installation guide:
  4. Create the Unified Intelligence Center Virtual Machines from the OVA template. OVA templates are available at: Cisco.com.

Creating Virtual Machines from OVA VM Template

See Unified Communications Virtualization Downloads (including OVA/OVF Templates) for more information.

Unified Intelligence Center OVA Templates download

Downloading OVA Template

  1. Proceed to the Cisco download page.
  1. To download a OVA file, click the Download File button next to that file.
  1. Click the Add to Cart button and then click the Download Cart link. A Download Cart page appears.
  1. Click the Proceed with Download button on this page. A Software License Agreement page appears.
  1. Read the Software License Agreement and click the Agree.
  1. Click either the Download Manager link (requires Java) or the Non Java Download Option link in the next window. A new browser window appears.
  1. If you select Download Manager option, a Select Location dialog box appears. Specify the location where you want to save the file, and click Open to save the file to your local machine.
  1. If you select Non Java Download option, click the Download link in the new browser window. Specify the location and save the file to your local machine.

Creating Virtual Machines by Deploying the OVA Templates

In the vSphere client, perform the following steps to deploy the Virtual machines.

  1. Highlight the host or cluster to which you wish the VM to be deployed.
  2. Select File > Deploy OVF Template.
  3. Click the Deploy from File radio button and specify the name and location of the file you downloaded in the previous section OR click the Deploy from URL radio button and specify the complete URL in the field, then click Next.
  4. Verify the details of the template, and click Next.
  5. Give the VM you are about to create a name, and choose an inventory location on your host, then click Next.
  6. Choose the datastore on which you would like the VM to reside - be sure there is sufficient free space to accommodate the new VM, then click Next.
  7. Choose a virtual network for the VM, then click Next.
  8. Verify the deployment settings, then click Finish.
Note Note:
  • VM CPU affinity is not supported. You don't need to set CPU affinity for the VMs that are running Unified Intelligence Center applications on the VMware ESXi on UCS platform.
  • VM resource Reservation - VM resource reservation is not supported for the VMs that are running Unified Intelligence Center applications on the VMware ESXi on UCS platform. The VM computing resources should have a default reservation setting, which is no resource reservations.
  • You cannot change the computing resource configuration of your VM at any time.
  • You can never go below the minimum VM computing resource requirements as defined in the OVA templates.
  • ESXi Server hyperthread is enabled by default.

Unified Intelligence Center Component Capacities and VM Configuration Requirements

This table shows the supported Unified Intelligence Center components, their capacities, and the VM computing resource requirements. You must use the OVA virtual machine templates to create the Unified Intelligence Center component VMs.

Unified Intelligence Center components virtual CPU RAM(GB) vDisk(GB) vNIC Template Name
Reporting and OAMP 4 6

146

1

For release:

  • 8.x - CUIC_852_OVA.ova
  • 9.x - cuic_9.0_vmv8_v2.1.ova
  • 10.x - CUIC_10.0.1_vmv8_v2.2


Unified Intelligence Center Component Co-Residency

You can have one or more Unified Intelligence Center VMs co-residing on the same ESXi server, however you must follow the rules described below.

  • You must not have CPU overcommitted on the ESXi server that is running Unified Intelligence Center application. The total number of CPUs among all the virtual machines on an ESXi host must not greater than the total number of CPUs available on the ESXi server.
  • You must not have memory overcommitted on the ESXi host that is running UC realtime applications. You must allocate minimum 6 GB of memory for the ESXi kernel.


IOPS and Storage System Performance Requirements

  • CPU usage (average) should not exceed 60% for the ESXi Server and for each of the individual processors, and for each VM.
  • Memory usage (average) should not exceed 80%x for the ESXi Server and for each of the VMs.
  • VM snapshots are not supported in production since they have significant impact on system performance.
  • Enable hyper threading on all ESXi servers.
  • The SAN must be able to handle the following Cisco Unified Intelligence Center application disk I/O characteristics:
Details
Write (Kilobytes/Sec)
Read (Kilobytes/Sec)
IOPS
Maximum
7758.00
466.00
781.40
95 Percentile
6446.30
433.10
628.34
Average 
5727.44
74.32
460.17
Minimum 
4897.00
0.00
288.75

Installation

Installing VMware Tools

The VMware Tools must be installed on each of the VMs and all of the VMware Tools default settings should be used. Refer to the VMware documentation for instructions on installing or upgrading VMware Tools on the VM with Windows operating system.

Installing Unified Intelligence Center Components on Virtual Machines

You can install the Unified Intelligence Center components after the configuration of the VMs. Installation of these Unified Intelligence Center components on a VM is the same as the installation of these components on physical hardware. See the Installation and Upgrade Guide for Cisco Unified Intelligence Center for the steps to install Unified Intelligence Center components.

Migrating

  • You can upgrade or migrate the Unified Intelligence Center components from physical hardware or another virtual machine after the configuration of the VMs. Upgrade or Migration of these Unified Intelligence Center software components to a VM is the same as the migration of these components to new physical hardware
  • To migrate to VMWare ESXi version 5.1 for Cisco Unified Intelligence Center 10.0(1), ensure that you migrate the ESXi server to 5.1 first. Next, upgrade the Unified Intelligence Center installation to 10.0(1).



Rating: 3.0/5 (1 vote cast)

Personal tools