Virtualization for Unified CCX

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (1 revision)
(9 intermediate revisions not shown)
Line 10: Line 10:
! Update
! Update
|-
|-
-
| June 2012
+
| January 2013
-
| Virtualization support for Release 9.0(1).
+
|
 +
*Added Section - ''New Identity Support for UCCX 9.0.2''
 +
 
 +
|-
 +
| July 2012
 +
|
 +
*Added ''WFO 9.0 virtualization''
 +
 
 +
|-
 +
| June 2012  
 +
|  
 +
*Virtualization support for Release 9.0(1)
 +
 
|-
|-
| July 2011  
| July 2011  
|  
|  
*Removed the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5'' section.  
*Removed the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5'' section.  
-
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5'' section.
+
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5'' section  
-
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5'' section.
+
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5'' section
|-
|-
| May 2011  
| May 2011  
|  
|  
-
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section.
+
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section  
-
*Added the ''Resource Reservation'' section.
+
*Added the ''Resource Reservation'' section
|-
|-
| March 2011  
| March 2011  
|  
|  
-
Updated the ''Unified CCX-Specific Information for OVA Templates'' section.
+
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section
|-
|-
| January 2011  
| January 2011  
|  
|  
-
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section.
+
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section  
-
*Updated Virtualization support for Release 8.5(1) and 8.0(x). Replaced table with text.
+
*Updated''Virtualization support for Release 8.5(1) and 8.0(x''). Replaced table with text
|-
|-
| December 2010  
| December 2010  
-
| Virtualization support for Release 8.5(1).
+
|  
 +
*Virtualization support for Release 8.5(1)
 +
 
|-
|-
| April 2010  
| April 2010  
-
| Virtualization support for Release 8.0(2).
+
|  
 +
*Virtualization support for Release 8.0(2)
 +
 
|}
|}
Line 56: Line 72:
*400-agent OVA is supported on C210M1/M2, B200M1/M2
*400-agent OVA is supported on C210M1/M2, B200M1/M2
-
Co-residency guidelines for CCX are described on [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines UC Virtualization Sizing Guidelines].
+
Co-residency guidelines for CCX are described on [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines UC Virtualization Sizing Guidelines].  
= Unified CCX-Specific Details for VMWare Requirements  =
= Unified CCX-Specific Details for VMWare Requirements  =
Line 70: Line 86:
:*Unified Computing System B200 M2, B230 M2, and B440 M2 Blade Server  
:*Unified Computing System B200 M2, B230 M2, and B440 M2 Blade Server  
:*Unified Computing System C200 M2 Server  
:*Unified Computing System C200 M2 Server  
-
:*Unified Computing System C210 M2 Server
+
:*Unified Computing System C210 M2 Server  
:*Unified Computing System C260 M2 Server
:*Unified Computing System C260 M2 Server
-
See [http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware Unified Computing System Hardware]for detailed information on these hardware models.
+
See [http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware Unified Computing System Hardware]for detailed information on these hardware models.  
= Virtual Machine(VM)-Specific Unified CCX Software Requirements  =
= Virtual Machine(VM)-Specific Unified CCX Software Requirements  =
-
See [http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#VMware_Infrastructure_Feature_Support VMware Infrastructure Feature Support ].
+
See [http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#VMware_Infrastructure_Feature_Support VMware Infrastructure Feature Support ].  
-
<br>'''{{note| Span based Silent Monitoring on UCS B-series is not supported}}'''
+
<br>'''{{note| Span based Silent Monitoring on UCS B-series is not supported}}'''  
= Resource Reservation  =
= Resource Reservation  =
Line 87: Line 103:
Resource reservation helps us to achieve the most optimum levels of utilization of underlying physical resources of ESXi&nbsp;4.1 and ESXi 5.0 qualified Cisco/HP/IBM servers either when Unified CCX VM has been deployed with multiple instances of other Unified CCX VM or co-resident with any other Unified Communications application VMs on the same server.  
Resource reservation helps us to achieve the most optimum levels of utilization of underlying physical resources of ESXi&nbsp;4.1 and ESXi 5.0 qualified Cisco/HP/IBM servers either when Unified CCX VM has been deployed with multiple instances of other Unified CCX VM or co-resident with any other Unified Communications application VMs on the same server.  
-
The resource reservation helps the user to confine the VMs to respective resources and also helps to achieve the highest possible level of utilization of underlying physical resources as long as the sum of all the VM resources are not oversubscribed.
+
The resource reservation helps the user to confine the VMs to respective resources and also helps to achieve the highest possible level of utilization of underlying physical resources as long as the sum of all the VM resources are not oversubscribed.  
= Unified CCX-Specific Information for OVA Templates  =
= Unified CCX-Specific Information for OVA Templates  =
Line 169: Line 185:
|}
|}
-
<br>'''Note:''' For detailed information on ''Supported Virtualization Upgrade Paths to Unified CCX '', see [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR].
+
<br>'''Note:''' For detailed information on ''Supported Virtualization Upgrade Paths to Unified CCX '', see [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR].  
-
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5 =
+
<br>
-
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.
+
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 9.0 in Unified CCX 9.0 &amp; 8.5 =
-
Cisco WFO Services supported for virtualization include the following:
+
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 9.0 for Unified CCX 9.0 &amp; 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co resident on the UCS platform with any number of other virtual machines running any other applications. <br>Cisco WFO Services supported for virtualization include:<br>• Cisco WFM 9.0 – Complete system on one virtual server<br>• Cisco QM 9.0 Base Server – All QM services except recording<br>• Cisco QM 9.0 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording<br>Note: Virtualizing the QM Monitor server for Server (SPAN) recording is not supported.<br>
-
* Cisco WFM 8.5.2 – Complete system on one virtual server
+
 
-
* Cisco QM 8.5.2 Base Server – All QM services except recording
+
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5  =
-
* Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
+
 
 +
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.
 +
 
 +
Cisco WFO Services supported for virtualization include the following:  
 +
 
 +
*Cisco WFM 8.5.2 – Complete system on one virtual server  
 +
*Cisco QM 8.5.2 Base Server – All QM services except recording  
 +
*Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
{{note|  
{{note|  
Line 185: Line 208:
* Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
* Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
* Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.
* Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.
-
}}
+
}}  
-
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5 =
+
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5 =
 +
 
 +
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.1 in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.
-
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.1 in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.
 
-
 
The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:  
The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:  
Line 196: Line 219:
*Unified CCX and Cisco WorkForce Management (WFM)  
*Unified CCX and Cisco WorkForce Management (WFM)  
*QM and WFM  
*QM and WFM  
-
*Unified CCX, QM, and WFM
+
*Unified CCX, QM, and WFM<br>
 +
 
 +
= New Identity Support for Unified CCX 9.0(2)  =
 +
 
 +
Use this feature to quickly deploy new instances of&nbsp;Unified CCX.
 +
 
 +
In the current version, using this procedure you can deploy Publisher Node/First Node of a Unified CCX cluster only. Install the Subscriber Node/Second Node using the standard installation procedure.
 +
 
 +
Perform&nbsp;the following procedure to create the new identity:
 +
 
 +
#Use the correct OVA to create a new VM for the Unified CCX virtual machine.
 +
#Use the standard installation process to install the Unified CCX product.
 +
#After the installation, do not perform any configuration. Convert the VM into a template.
 +
#Use that&nbsp;template to create a new virtual machine instance.
 +
#Power on the VM.
 +
#Use the Answer File Generator tool ([http://www.cisco.com/web/cuc_afg/index.html http://www.cisco.com/web/cuc_afg/index.html]) to create a platformConfig.xml file.
 +
#Insert the XML file into a virtual floppy instance (for directions, see [http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1739 http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&amp;cmd=displayKC&amp;externalId=1739]).
 +
#Mount the .flp file in the floppy drive of the new VM.
 +
#Log in to the CLI of the VM (using the console or SSH) and run the command “'''utils import config'''”. The system reboots and restarts with the new identity.
----
----
-
{| border="1" class="wikitable"
+
{| class="wikitable" border="1"
|-
|-
-
! style="background-color: rgb(255, 215, 0);" | '''Back to:''' [[Unified Communications in a Virtualized Environment|Unified Communications in a Virtualized Environment]]
+
! style="background-color: rgb(255,215,0)" | '''Back to:''' [[Unified Communications in a Virtualized Environment|Unified Communications in a Virtualized Environment]]
|}
|}
-
 
[[Category:Unified_Contact_Center_Express]]
[[Category:Unified_Contact_Center_Express]]

Revision as of 14:07, 4 January 2013

Note Note: The information for Unified IP-IVR is the same as Unified CCX.

Contents

Updates to this Page

The following is a list of significant updates to this page:

Date Update
January 2013
  • Added Section - New Identity Support for UCCX 9.0.2
July 2012
  • Added WFO 9.0 virtualization
June 2012
  • Virtualization support for Release 9.0(1)
July 2011
  • Removed the Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5 section.
  • Added the Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5 section
  • Added the Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5 section
May 2011
  • Updated the Unified CCX-Specific Information for OVA Templates section
  • Added the Resource Reservation section
March 2011
  • Updated the Unified CCX-Specific Information for OVA Templates section
January 2011
  • Updated the Unified CCX-Specific Information for OVA Templates section
  • UpdatedVirtualization support for Release 8.5(1) and 8.0(x). Replaced table with text
December 2010
  • Virtualization support for Release 8.5(1)
April 2010
  • Virtualization support for Release 8.0(2)

Information for Partners about Unified CCX Deployments

See High-level Checklist for Design and Implementation.

Unified CCX OVA Support for Different Hardware

Unified CCX 8.5(1) and 9.0(1) supports 3 OVAs:

  • 100-agent OVA is supported on C200M2 C210M1/M2, B200M1/M2
    Note Note: On the C200M2, CCX supports up to four CCX VMs
  • 300-agent OVA is supported on C210M1/M2, B200M1/M2
  • 400-agent OVA is supported on C210M1/M2, B200M1/M2

Co-residency guidelines for CCX are described on UC Virtualization Sizing Guidelines.

Unified CCX-Specific Details for VMWare Requirements

See Hypervisor Support for Virtualized UC (Vendors, Products, Versions, Editions).

Virtual Machine(VM)-Specific Unified CCX Hardware Requirements

The following Unified Communications System Hardware are the newly added servers for Unified CCX 8.5(1):

Note Note: These servers are also supported for Unified CCX 9.0(1).
  • Unified Computing System B200 M2, B230 M2, and B440 M2 Blade Server
  • Unified Computing System C200 M2 Server
  • Unified Computing System C210 M2 Server
  • Unified Computing System C260 M2 Server

See Unified Computing System Hardwarefor detailed information on these hardware models.

Virtual Machine(VM)-Specific Unified CCX Software Requirements

See VMware Infrastructure Feature Support .


Note Note: Span based Silent Monitoring on UCS B-series is not supported

Resource Reservation

The Resource Reservation has been enabled for all the three Unified CCX Profiles wherein any one of the Unified CCX Profile can be deployed through the single OVA. The Unified CCX 8.5(1) and 9.0(1) has been successfully qualified with vCPU reservations at 900 MHz per vCPU.

Resource reservation helps us to achieve the most optimum levels of utilization of underlying physical resources of ESXi 4.1 and ESXi 5.0 qualified Cisco/HP/IBM servers either when Unified CCX VM has been deployed with multiple instances of other Unified CCX VM or co-resident with any other Unified Communications application VMs on the same server.

The resource reservation helps the user to confine the VMs to respective resources and also helps to achieve the highest possible level of utilization of underlying physical resources as long as the sum of all the VM resources are not oversubscribed.

Unified CCX-Specific Information for OVA Templates

Any of the three Unified CCX profiles 100, 300, or 400 can be deployed using a single OVA template.

Click here to download the latest OVA Templates Information for Unified CCX.

The support for VMware vSphere ESXi 5.0 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 9.0(1).

As support for VMware vSphere ESXi 4.1 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 8.0(2) SU2, Unified CCX 8.5(1), and Unified CCX 9.0(1); you can host Unified CCX 8.0(2) SU2, 8.5(1), and 9.0(1) Virtual Machine (VM) on ESXi 4.1.

Follow the procedure mentioned below if you are using Unified CCX 8.0(2) currently:

Follow the procedure mentioned below if you are using Unified CCX 8.5(1) currently:

Follow the procedure mentioned below if you are using Unified CCX 9.0(1) currently:

Unified CCX-Specific Information for Sizing Guidelines

See OVA Templates Information for Unified CCX for detailed information on sizing guidelines for Unified CCX.

UCS Network Configuration

See Unified Communications Virtualization Downloads (including OVA/OVF Templates).

Performance Requirements

See Datasheet for Cisco Unified Contact Center Express 8.5 for detailed information on performance requirements.

Unified CCX-Specific VM Installation Information

Migrating to Unified CCX Release 8.5(1) or 9.0(1) from Physical to Virtual Server

To migrate to Unified CCX Release 8.5(1) or 9.0(1) from a physical server to a virtual server, follow the steps in the table below.

Task Reference
Perform a complete backup of Unified CCX 8.5(1) or 9.0(1) on bare metal server and store the backup TAR file at a safe SFTP network location. Shutdown the server. Refer to the Managing Backup Devices section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.

Install ESXi on any one of the Unified CCX Supported Hardware for Virtualization as mentioned above.

See ESXi_Support_for_Contact_Center_Applications for ESXi version support information.

Refer to the VMware documentation to install VMware ESXi.

See ESXi_Support_for_Contact_Center_Applications for ESXi version support information.

Deploy VMs from the templates mentioned above. Refer to the Readme with the Unified CCX virtual machine template.
Perform fresh installation of Unified CCX 8.5(1) or 9.0(1) on the VM with the same network and platform settings of the baremetal server. Refer to the Installation Guide for Cisco Unified CCX and Cisco Unified IP IVR.
Log in to the Disaster Recovery System with Platform Administrator credentials and perform the restore using the backup TAR archived in the first task. Refer to the Restore Scenarios section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.


Note: For detailed information on Supported Virtualization Upgrade Paths to Unified CCX , see Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR.


Virtualization Support for Cisco Unified Workforce Optimization (WFO) 9.0 in Unified CCX 9.0 & 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 9.0 for Unified CCX 9.0 & 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co resident on the UCS platform with any number of other virtual machines running any other applications.
Cisco WFO Services supported for virtualization include:
• Cisco WFM 9.0 – Complete system on one virtual server
• Cisco QM 9.0 Base Server – All QM services except recording
• Cisco QM 9.0 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
Note: Virtualizing the QM Monitor server for Server (SPAN) recording is not supported.

Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.

Cisco WFO Services supported for virtualization include the following:

  • Cisco WFM 8.5.2 – Complete system on one virtual server
  • Cisco QM 8.5.2 Base Server – All QM services except recording
  • Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
Note Note:
  • No recording server is required for Desktop recording since recording is done by a service on each recorded user's PC therefore only the Base server is required.
  • Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
  • Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.

Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.1 in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.

The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:

  • Unified CCX and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM)
  • Unified CCX and Cisco WorkForce Management (WFM)
  • QM and WFM
  • Unified CCX, QM, and WFM

New Identity Support for Unified CCX 9.0(2)

Use this feature to quickly deploy new instances of Unified CCX.

In the current version, using this procedure you can deploy Publisher Node/First Node of a Unified CCX cluster only. Install the Subscriber Node/Second Node using the standard installation procedure.

Perform the following procedure to create the new identity:

  1. Use the correct OVA to create a new VM for the Unified CCX virtual machine.
  2. Use the standard installation process to install the Unified CCX product.
  3. After the installation, do not perform any configuration. Convert the VM into a template.
  4. Use that template to create a new virtual machine instance.
  5. Power on the VM.
  6. Use the Answer File Generator tool (http://www.cisco.com/web/cuc_afg/index.html) to create a platformConfig.xml file.
  7. Insert the XML file into a virtual floppy instance (for directions, see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1739).
  8. Mount the .flp file in the floppy drive of the new VM.
  9. Log in to the CLI of the VM (using the console or SSH) and run the command “utils import config”. The system reboots and restarts with the new identity.

Back to: Unified Communications in a Virtualized Environment

Rating: 4.0/5 (10 votes cast)

Personal tools