Virtualization for Unified CCX

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
(14 intermediate revisions not shown)
Line 1: Line 1:
-
{{note| The information for Unified IP-IVR is the same as Unified CCX.}}
+
{{note| The information for Unified IP-IVR is the same as Unified CCX.}}  
-
= Updates to this Page =
+
= Updates to this Page =
-
The following is a list of significant updates to this page:
+
The following is a list of significant updates to this page:  
-
 
+
-
{| class="wikitable"
+
 +
{| class="wikitable FCK__ShowTableBorders"
|-
|-
! Date  
! Date  
! Update
! Update
-
 
|-
|-
-
| March 2011
+
| July 2012
-
|  
+
| Added WFO 9.0 virtualization
-
Updated the ''Unified CCX-Specific Information for OVA Templates'' section.                                                                                                                          
+
|-
|-
 +
| June 2012
 +
| Virtualization support for Release 9.0(1).
|-
|-
 +
| July 2011
 +
|
 +
*Removed the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5'' section.
 +
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5'' section.
 +
*Added the ''Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5'' section.
 +
|-
|-
-
| January 2011
+
| May 2011  
|  
|  
-
* Updated the ''Unified CCX-Specific Information for OVA Templates'' section.                                                                                                                          
+
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section.  
-
* Updated Virtualization support for Release 8.5(1) and 8.0(x). Replaced table with text.
+
*Added the ''Resource Reservation'' section.
 +
 
|-
|-
 +
| March 2011
 +
|
 +
Updated the ''Unified CCX-Specific Information for OVA Templates'' section.
 +
|-
|-
-
| December 2010
+
| January 2011
-
| Virtualization support for Release 8.5(1).                                                                                                                           
+
|  
-
|-
+
*Updated the ''Unified CCX-Specific Information for OVA Templates'' section.
-
|-
+
*Updated Virtualization support for Release 8.5(1) and 8.0(x). Replaced table with text.
-
| April 2010
+
 
-
| Virtualization support for Release 8.0(2).                                                                                    
+
|-
|-
 +
| December 2010
 +
| Virtualization support for Release 8.5(1).
|-
|-
 +
| April 2010
 +
| Virtualization support for Release 8.0(2).
|}
|}
-
= Information for Partners about Unified CCX Deployments =
+
= Information for Partners about Unified CCX Deployments =
-
See [[High-level Checklist for Design and Implementation]].
+
-
== Unified CCX OVA Support for Different Hardware ==
+
See [[High-level Checklist for Design and Implementation]].  
-
CCX 8.5(1) supports 3 OVAs:
+
-
* 100-agent OVA is supported on C200M2 C210M1/M2, B200M1/M2. {{note| On the C200M2, CCX supports up to 3 CCX VMs}}
+
-
* 300-agent OVA is supported on C210M1/M2, B200M1/M2
+
-
* 400-agent OVA is supported on C210M1/M2, B200M1/M2
+
-
Co-residency guidelines for CCX are described on
+
== Unified CCX OVA Support for Different Hardware  ==
-
[http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines UC Virtualization Sizing Guidelines].
+
-
= Unified CCX-Specific Details for VMWare Requirements=
+
Unified CCX 8.5(1) and 9.0(1) supports 3 OVAs:
-
See [http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#Hypervisor_Support_for_Virtualized_UC_.28Vendors.2C_Products.2C_Versions.2C_Editions.29 Hypervisor Support for Virtualized UC (Vendors, Products, Versions, Editions].
+
-
= Virtual Machine(VM)-Specific Unified CCX Hardware Requirements =
+
*100-agent OVA is supported on C200M2 C210M1/M2, B200M1/M2 {{note| On the C200M2, CCX supports up to four CCX VMs}}
 +
*300-agent OVA is supported on C210M1/M2, B200M1/M2
 +
*400-agent OVA is supported on C210M1/M2, B200M1/M2
-
The following Unified Communications System Hardware are the newly added servers for Unified CCX 8.5(1):
+
Co-residency guidelines for CCX are described on [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Sizing_Guidelines UC Virtualization Sizing Guidelines].
-
:* Unified Computing System B200 M2 Blade Server (UCS-B200M2-VCS1)
+
= Unified CCX-Specific Details for VMWare Requirements  =
-
:* Unified Computing System C200 M2 Server (UCS-C200M2-VCD1)
+
-
:* Unified Computing System C210 M2 Server (UCS-C210M2-VCD2)
+
-
See [[Unified Computing System Hardware]] for detailed information on these hardware models.
+
See [http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#Hypervisor_Support_for_Virtualized_UC_.28Vendors.2C_Products.2C_Versions.2C_Editions.29 Hypervisor Support for Virtualized UC (Vendors, Products, Versions, Editions)].  
-
= Virtual Machine(VM)-Specific Unified CCX Software Requirements =
+
= Virtual Machine(VM)-Specific Unified CCX Hardware Requirements =
-
See  
+
The following Unified Communications System Hardware are the newly added servers for Unified CCX 8.5(1):
-
[http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#VMware_Infrastructure_Feature_Support VMware Infrastructure Feature Support ].
+
 
 +
{{Note| These servers are also supported for Unified CCX 9.0(1).}}
 +
 
 +
:*Unified Computing System B200 M2, B230 M2, and B440 M2 Blade Server
 +
:*Unified Computing System C200 M2 Server
 +
:*Unified Computing System C210 M2 Server
 +
:*Unified Computing System C260 M2 Server
 +
 
 +
See [http://docwiki.cisco.com/wiki/Unified_Computing_System_Hardware Unified Computing System Hardware]for detailed information on these hardware models.
 +
 
 +
= Virtual Machine(VM)-Specific Unified CCX Software Requirements  =
 +
 
 +
See [http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements#VMware_Infrastructure_Feature_Support VMware Infrastructure Feature Support ].
 +
 
 +
<br>'''{{note| Span based Silent Monitoring on UCS B-series is not supported}}'''
 +
 
 +
= Resource Reservation  =
 +
 
 +
The Resource Reservation has been enabled for all the three Unified CCX Profiles wherein any one of the Unified CCX Profile can be deployed through the single OVA. The Unified CCX 8.5(1) and 9.0(1) has been successfully qualified with vCPU reservations at 900 MHz per vCPU.
 +
 
 +
Resource reservation helps us to achieve the most optimum levels of utilization of underlying physical resources of ESXi&nbsp;4.1 and ESXi 5.0 qualified Cisco/HP/IBM servers either when Unified CCX VM has been deployed with multiple instances of other Unified CCX VM or co-resident with any other Unified Communications application VMs on the same server.
 +
 
 +
The resource reservation helps the user to confine the VMs to respective resources and also helps to achieve the highest possible level of utilization of underlying physical resources as long as the sum of all the VM resources are not oversubscribed.  
= Unified CCX-Specific Information for OVA Templates  =
= Unified CCX-Specific Information for OVA Templates  =
-
Click [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express here] to download the latest OVA Templates Information for Unified CCX.
+
Any of the three Unified CCX profiles 100, 300, or 400 can be deployed using a single OVA template.  
-
As support for VMware vSphere ESXi 4.1 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 8.0(2) SU2 and Unified CCX 8.5(1), you can host Unified CCX 8.0(2) SU2 and 8.5(1) Virtual Machine (VM) on ESXi 4.1.  
+
Click [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express here] to download the latest OVA Templates Information for Unified CCX.  
-
'''Follow the procedure mentioned below if you are using Unified CCX 8.0(2) currently:'''
+
The support for VMware vSphere ESXi&nbsp;5.0 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 9.0(1).  
-
* Upgrade to Unified CCX 8.0(2) SU2 or higher
+
-
* Disable the LRO (Large Receive Offload)
+
-
* Download the appropriate OVA version 2 files from [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] depending on the sizing guidelines and requirements mentioned at [http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Unified_CCX.2C_Release__8.5.281.29 Unified CCX OVA Support for Different Hardware]
+
-
* Upgrade VMware tools using the cop file ''ciscocm.vmtoolsUpgrade4.1-8.3.2-257589-v14.cop.sgn''
+
-
'''Follow the procedure mentioned below if you are using Unified CCX 8.5(1) or higher currently:'''
+
As support for VMware vSphere ESXi&nbsp;4.1 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 8.0(2) SU2, Unified CCX 8.5(1), and&nbsp;Unified CCX 9.0(1);&nbsp;you can host Unified CCX 8.0(2) SU2, 8.5(1), and 9.0(1)&nbsp;Virtual Machine (VM) on ESXi 4.1.
-
* Disable the LRO (Large Receive Offload)
+
-
* Download the appropriate OVA version 2 files from [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] depending on the sizing guidelines and requirements mentioned at [http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Unified_CCX.2C_Release__8.5.281.29 Unified CCX OVA Support for Different Hardware]
+
-
* Upgrade VMware tools using the following CLI commands in Unified CCX 8.5(1) or higher:
+
-
** ''"utils vmware upgrade”''
+
-
** ''“utils vmware status”''
+
-
= Unified CCX-Specific Information for Sizing Guidelines =
+
'''Follow the procedure mentioned below if you are using Unified CCX 8.0(2) currently:'''
-
See [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] for detailed information on sizing guidelines for Unified CCX.
+
-
== UCS Network Configuration ==
+
*Upgrade to Unified CCX 8.0(2) SU2 or higher
 +
*Disable the LRO (Large Receive Offload)
 +
*Download the appropriate OVA version 2 files from [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] depending on the sizing guidelines and requirements mentioned at [http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Unified_CCX.2C_Release__8.5.281.29 Unified CCX OVA Support for Different Hardware]
 +
*Upgrade VMware tools using the cop file ''ciscocm.vmtoolsUpgrade4.1-8.3.2-257589-v14.cop.sgn''
-
See [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates) Unified Communications Virtualization Downloads (including OVA/OVF Templates)].
+
'''Follow the procedure mentioned below if you are using Unified CCX 8.5(1) currently:'''
-
== Performance Requirements ==
+
*Disable the LRO (Large Receive Offload)
 +
*Download the appropriate OVA version 2 files from [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] depending on the sizing guidelines and requirements mentioned at [http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX#Unified_CCX.2C_Release__8.5.281.29 Unified CCX OVA Support for Different Hardware]
 +
*Upgrade VMware tools using the following CLI commands in Unified CCX 8.5(1) or higher:
 +
**''"utils vmware upgrade”''
 +
**''“utils vmware status”''
-
See [http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps1846/data_sheet_c78-629807.pdf Datasheet for Cisco Unified Contact Center Express 8.5] for detailed information on performance requirements.
+
'''Follow the procedure mentioned below if you are using Unified CCX 9.0(1) currently:'''
-
= Unified CCX-Specific VM Installation Information =
+
*Disable the LRO (Large Receive Offload)
 +
*Download the appropriate OVA version 3 files from [http://www.cisco.com/cisco/software/release.html?mdfid=270569179&flowid=5217&softwareid=283733053&release=2.1&rellifecycle=&relind=AVAILABLE&reltype=latest OVA Templates Information for Unified CCX] depending on the sizing guidelines and requirements mentioned at [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express.2FCisco_Unified_IP_Intelligent_Voice_Response_.28IP_IVR.29 Unified CCX OVA Support for Different Hardware]
 +
*Upgrade VMware tools using the following CLI commands in Unified CCX 9.0(1):
 +
**''"utils vmware upgrade”''
 +
**''“utils vmware status”''
-
=== Migrating to Unified CCX Release 8.5(1) from Physical to Virtual Server ===
+
= Unified CCX-Specific Information for Sizing Guidelines =
-
To migrate to Unified CCX Release 8.5(1) from a physical server to a virtual server, follow the steps in the table below.  
+
See [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express OVA Templates Information for Unified CCX] for detailed information on sizing guidelines for Unified CCX.
 +
 
 +
== UCS Network Configuration  ==
 +
 
 +
See [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates) Unified Communications Virtualization Downloads (including OVA/OVF Templates)].
 +
 
 +
== Performance Requirements  ==
 +
 
 +
See [http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps1846/data_sheet_c78-629807.pdf Datasheet for Cisco Unified Contact Center Express 8.5] for detailed information on performance requirements.
 +
 
 +
= Unified CCX-Specific VM Installation Information  =
 +
 
 +
=== Migrating to Unified CCX Release 8.5(1) or 9.0(1) from Physical to Virtual Server  ===
 +
 
 +
To migrate to Unified CCX Release 8.5(1) or 9.0(1) from a physical server to a virtual server, follow the steps in the table below.  
{| class="wikitable FCK__ShowTableBorders"
{| class="wikitable FCK__ShowTableBorders"
Line 105: Line 148:
! Reference
! Reference
|-
|-
-
| Perform a complete backup of Unified CCX 8.5(1) on bare metal server and store the backup TAR file at a safe SFTP network location. Shutdown the server.  
+
| Perform a complete backup of Unified CCX 8.5(1) or 9.0(1) on bare metal server and store the backup TAR file at a safe SFTP network location. Shutdown the server.  
| Refer to the [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_installation_and_configuration_guides_list.html Managing Backup Devices] section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.
| Refer to the [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_installation_and_configuration_guides_list.html Managing Backup Devices] section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.
|-
|-
Line 122: Line 165:
| Refer to the Readme with the [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express Unified CCX virtual machine template].
| Refer to the Readme with the [http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29#Cisco_Unified_Contact_Center_Express Unified CCX virtual machine template].
|-
|-
-
| Perform fresh installation of Unified CCX 8.5(1) on the VM with the same network and platform settings of the baremetal server.  
+
| Perform fresh installation of Unified CCX 8.5(1) or 9.0(1) on the VM with the same network and platform settings of the baremetal server.  
| Refer to the [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_installation_guides_list.html Installation Guide] for Cisco Unified CCX and Cisco Unified IP IVR.
| Refer to the [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_installation_guides_list.html Installation Guide] for Cisco Unified CCX and Cisco Unified IP IVR.
|-
|-
Line 129: Line 172:
|}
|}
-
<br>'''Note:''' For detailed information on ''Supported Virtualization Upgrade Paths to Unified CCX 8.5(1)'', see [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR].
+
<br>'''Note:''' For detailed information on ''Supported Virtualization Upgrade Paths to Unified CCX '', see [http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_device_support_tables_list.html Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR].  
-
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5 =
+
<br>
-
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.
+
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 9.0 in Unified CCX 9.0 &amp; 8.5 =
-
The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) in a co-residence deployment with Unified CCX 8.5 only:
+
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 9.0 for Unified CCX 9.0 &amp; 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co resident on the UCS platform with any number of other virtual machines running any other applications. <br>Cisco WFO Services supported for virtualization include:<br>• Cisco WFM 9.0 – Complete system on one virtual server<br>• Cisco QM 9.0 Base Server – All QM services except recording<br>• Cisco QM 9.0 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording<br>Note: Virtualizing the QM Monitor server for Server (SPAN) recording is not supported.<br>
-
* Unified CCX and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) 
+
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5  =
-
* Unified CCX and Cisco WorkForce Management (WFM)
+
-
* QM and WFM
+
-
* Unified CCX, QM, and WFM
+
-
----
+
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.
-
<br>
+
Cisco WFO Services supported for virtualization include the following:
-
{| border="1" class="wikitable"
+
*Cisco WFM 8.5.2 – Complete system on one virtual server
 +
*Cisco QM 8.5.2 Base Server – All QM services except recording
 +
*Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
 +
 
 +
{{note|  
 +
 
 +
* No recording server is required for Desktop recording since recording is done by a service on each recorded user's PC therefore only the Base server is required.
 +
* Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
 +
* Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.
 +
}}
 +
 
 +
= Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5  =
 +
 
 +
Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.1 in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.
 +
 
 +
The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:
 +
 
 +
*Unified CCX and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM)
 +
*Unified CCX and Cisco WorkForce Management (WFM)
 +
*QM and WFM
 +
*Unified CCX, QM, and WFM<br>
 +
 
 +
----
 +
 
 +
{| class="wikitable" border="1"
|-
|-
-
! style="background-color: rgb(255, 215, 0);" | '''Back to:''' [[Unified Communications in a Virtualized Environment]]
+
! style="background-color: rgb(255,215,0)" | '''Back to:''' [[Unified Communications in a Virtualized Environment|Unified Communications in a Virtualized Environment]]
|}
|}
-
 
+
[[Category:Unified_Contact_Center_Express]]
-
[[Category:Unified Contact Center Express]]
+

Revision as of 13:03, 11 October 2012

Note Note: The information for Unified IP-IVR is the same as Unified CCX.

Contents

Updates to this Page

The following is a list of significant updates to this page:

Date Update
July 2012 Added WFO 9.0 virtualization
June 2012 Virtualization support for Release 9.0(1).
July 2011
  • Removed the Virtualization Support for Cisco Unified Workforce Optimization (WFO) in Unified CCX 8.5 section.
  • Added the Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5 section.
  • Added the Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5 section.
May 2011
  • Updated the Unified CCX-Specific Information for OVA Templates section.
  • Added the Resource Reservation section.
March 2011

Updated the Unified CCX-Specific Information for OVA Templates section.

January 2011
  • Updated the Unified CCX-Specific Information for OVA Templates section.
  • Updated Virtualization support for Release 8.5(1) and 8.0(x). Replaced table with text.
December 2010 Virtualization support for Release 8.5(1).
April 2010 Virtualization support for Release 8.0(2).

Information for Partners about Unified CCX Deployments

See High-level Checklist for Design and Implementation.

Unified CCX OVA Support for Different Hardware

Unified CCX 8.5(1) and 9.0(1) supports 3 OVAs:

  • 100-agent OVA is supported on C200M2 C210M1/M2, B200M1/M2
    Note Note: On the C200M2, CCX supports up to four CCX VMs
  • 300-agent OVA is supported on C210M1/M2, B200M1/M2
  • 400-agent OVA is supported on C210M1/M2, B200M1/M2

Co-residency guidelines for CCX are described on UC Virtualization Sizing Guidelines.

Unified CCX-Specific Details for VMWare Requirements

See Hypervisor Support for Virtualized UC (Vendors, Products, Versions, Editions).

Virtual Machine(VM)-Specific Unified CCX Hardware Requirements

The following Unified Communications System Hardware are the newly added servers for Unified CCX 8.5(1):

Note Note: These servers are also supported for Unified CCX 9.0(1).
  • Unified Computing System B200 M2, B230 M2, and B440 M2 Blade Server
  • Unified Computing System C200 M2 Server
  • Unified Computing System C210 M2 Server
  • Unified Computing System C260 M2 Server

See Unified Computing System Hardwarefor detailed information on these hardware models.

Virtual Machine(VM)-Specific Unified CCX Software Requirements

See VMware Infrastructure Feature Support .


Note Note: Span based Silent Monitoring on UCS B-series is not supported

Resource Reservation

The Resource Reservation has been enabled for all the three Unified CCX Profiles wherein any one of the Unified CCX Profile can be deployed through the single OVA. The Unified CCX 8.5(1) and 9.0(1) has been successfully qualified with vCPU reservations at 900 MHz per vCPU.

Resource reservation helps us to achieve the most optimum levels of utilization of underlying physical resources of ESXi 4.1 and ESXi 5.0 qualified Cisco/HP/IBM servers either when Unified CCX VM has been deployed with multiple instances of other Unified CCX VM or co-resident with any other Unified Communications application VMs on the same server.

The resource reservation helps the user to confine the VMs to respective resources and also helps to achieve the highest possible level of utilization of underlying physical resources as long as the sum of all the VM resources are not oversubscribed.

Unified CCX-Specific Information for OVA Templates

Any of the three Unified CCX profiles 100, 300, or 400 can be deployed using a single OVA template.

Click here to download the latest OVA Templates Information for Unified CCX.

The support for VMware vSphere ESXi 5.0 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 9.0(1).

As support for VMware vSphere ESXi 4.1 as hypervisor on Cisco Servers and boot from SAN have been enabled for Unified CCX 8.0(2) SU2, Unified CCX 8.5(1), and Unified CCX 9.0(1); you can host Unified CCX 8.0(2) SU2, 8.5(1), and 9.0(1) Virtual Machine (VM) on ESXi 4.1.

Follow the procedure mentioned below if you are using Unified CCX 8.0(2) currently:

Follow the procedure mentioned below if you are using Unified CCX 8.5(1) currently:

Follow the procedure mentioned below if you are using Unified CCX 9.0(1) currently:

Unified CCX-Specific Information for Sizing Guidelines

See OVA Templates Information for Unified CCX for detailed information on sizing guidelines for Unified CCX.

UCS Network Configuration

See Unified Communications Virtualization Downloads (including OVA/OVF Templates).

Performance Requirements

See Datasheet for Cisco Unified Contact Center Express 8.5 for detailed information on performance requirements.

Unified CCX-Specific VM Installation Information

Migrating to Unified CCX Release 8.5(1) or 9.0(1) from Physical to Virtual Server

To migrate to Unified CCX Release 8.5(1) or 9.0(1) from a physical server to a virtual server, follow the steps in the table below.

Task Reference
Perform a complete backup of Unified CCX 8.5(1) or 9.0(1) on bare metal server and store the backup TAR file at a safe SFTP network location. Shutdown the server. Refer to the Managing Backup Devices section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.

Install ESXi on any one of the Unified CCX Supported Hardware for Virtualization as mentioned above.

See ESXi_Support_for_Contact_Center_Applications for ESXi version support information.

Refer to the VMware documentation to install VMware ESXi.

See ESXi_Support_for_Contact_Center_Applications for ESXi version support information.

Deploy VMs from the templates mentioned above. Refer to the Readme with the Unified CCX virtual machine template.
Perform fresh installation of Unified CCX 8.5(1) or 9.0(1) on the VM with the same network and platform settings of the baremetal server. Refer to the Installation Guide for Cisco Unified CCX and Cisco Unified IP IVR.
Log in to the Disaster Recovery System with Platform Administrator credentials and perform the restore using the backup TAR archived in the first task. Refer to the Restore Scenarios section in the Disaster Recovery System Administration Guide for Cisco Unified CCX and Cisco Unified IP IVR.


Note: For detailed information on Supported Virtualization Upgrade Paths to Unified CCX , see Software and Hardware Compatibility Guide for Cisco Unified CCX and Cisco Unified IP IVR.


Virtualization Support for Cisco Unified Workforce Optimization (WFO) 9.0 in Unified CCX 9.0 & 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 9.0 for Unified CCX 9.0 & 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co resident on the UCS platform with any number of other virtual machines running any other applications.
Cisco WFO Services supported for virtualization include:
• Cisco WFM 9.0 – Complete system on one virtual server
• Cisco QM 9.0 Base Server – All QM services except recording
• Cisco QM 9.0 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
Note: Virtualizing the QM Monitor server for Server (SPAN) recording is not supported.

Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.2 in Unified CCX 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.2 in Unified CCX 8.5 are certified to run on any Cisco UCS server with resources available to support this template. As such it can be co-resident on the UCS platform with any number of other virtual machines running any other applications.

Cisco WFO Services supported for virtualization include the following:

  • Cisco WFM 8.5.2 – Complete system on one virtual server
  • Cisco QM 8.5.2 Base Server – All QM services except recording
  • Cisco QM 8.5.2 Recording Server – Recording services for QM Network (BIB) or Server (SPAN) recording
Note Note:
  • No recording server is required for Desktop recording since recording is done by a service on each recorded user's PC therefore only the Base server is required.
  • Network(BIB) or Server (SPAN) recording must be on separate virtual or physical servers as the option for running these services co-resident on the Base server for a small number of these users is not supported on the UCS platform.
  • Virtualizing the Monitor server for Server (SPAN) recording is not supported on the UCS platform.

Virtualization Support for Cisco Unified Workforce Optimization (WFO) 8.5.1 in Unified CCX 8.5

Cisco WorkForce Management (WFM) and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM) version 8.5.1 in Unified CCX 8.5 are certified to run on the Cisco UCS C210M1 or M2 platform, either as a standalone or in a co-residence configuration.

The following combination of VMs are supported for Cisco Unified Workforce Optimization (WFO) 8.5.1 in a co-residence deployment with Unified CCX 8.5 only:

  • Unified CCX and Compliance Recording (CR)/ Quality Manager (QM)/ Advanced Quality Managers (AQM)
  • Unified CCX and Cisco WorkForce Management (WFM)
  • QM and WFM
  • Unified CCX, QM, and WFM

Back to: Unified Communications in a Virtualized Environment

Rating: 4.0/5 (10 votes cast)

Personal tools