Video on ISR 2800 3800 H.320 GW with ISO 13871 bonding Configuration Example - Revision history

Msamarts: /* Related show Commands */

2011-02-08T12:08:09Z

Related show Commands

← Older revision		Revision as of 12:08, 8 February 2011
Line 218:		Line 218:
	#1. Add to the config or make sure you have it already:		#1. Add to the config or make sure you have it already:

-	~~service sequence-numbers~~
-	~~service timestamps debug datetime msec~~
-	~~service timestamps log datetime msec~~
	!		!
-	logging buffered 5000000	+	service sequence-numbers
-	logging rate-limit 10000	+	service timestamps debug datetime msec
-	logging queue-limit 100000	+	service timestamps log datetime msec
-	no logging console	+	!
		+	logging buffered 5000000
		+	logging rate-limit 10000
		+	logging queue-limit 100000
		+	no logging console
		+	!

	#2. Then start logging to a file from your telnet application and get:		#2. Then start logging to a file from your telnet application and get:

-	~~U all~~
-	~~Term no mon~~
-	~~Term len 0~~
	!		!
-	Sh ver	+	U all
-	Sh run	+	Term no mon
		+	Term len 0
		+	!
		+	Sh ver
		+	Sh run
		+	!

	#3. Then enable debugs (you can copy / paste all of them to the telnet session window )		#3. Then enable debugs (you can copy / paste all of them to the telnet session window )

-	Deb voip ccapi inout	+	!
-	Deb isdn q931	+	Deb voip ccapi inout
-	Deb h225 q931	+	Deb isdn q931
-	Deb h225 asn1	+	Deb h225 q931
-	Deb h245 asn1	+	Deb h225 asn1
-	Deb cch323 h245	+	Deb h245 asn1
-	deb voip tsp dialpeer	+	Deb cch323 h245
-	deb voip h221 raw decode	+	deb voip tsp dialpeer
		+	deb voip h221 raw decode

-	Sh deb	+	Sh deb
-	Term no mon	+	Term no mon

	Clear log before placing call:		Clear log before placing call:

-	Clear logg	+	Clear logg

	Then place the call and get content of the buffer as:		Then place the call and get content of the buffer as:

-	Show logg	+	Show logg

	Please send the log in simple TXT format attached to the e-mail in simple TXT format with extension".TXT".		Please send the log in simple TXT format attached to the e-mail in simple TXT format with extension".TXT".

Msamarts: /* Related show Commands */

2011-02-08T12:06:20Z

Related show Commands

← Older revision		Revision as of 12:06, 8 February 2011
Line 214:		Line 214:
	!		!

-	~~Enjoy~~ :)	+	In case you will need to contact TAC, you can get the debugs following this template:

		+	#1. Add to the config or make sure you have it already:
		+
		+	service sequence-numbers
		+	service timestamps debug datetime msec
		+	service timestamps log datetime msec
		+	!
		+	logging buffered 5000000
		+	logging rate-limit 10000
		+	logging queue-limit 100000
		+	no logging console
		+
		+	#2. Then start logging to a file from your telnet application and get:
		+
		+	U all
		+	Term no mon
		+	Term len 0
		+	!
		+	Sh ver
		+	Sh run
		+
		+	#3. Then enable debugs (you can copy / paste all of them to the telnet session window )
		+
		+	Deb voip ccapi inout
		+	Deb isdn q931
		+	Deb h225 q931
		+	Deb h225 asn1
		+	Deb h245 asn1
		+	Deb cch323 h245
		+	deb voip tsp dialpeer
		+	deb voip h221 raw decode
		+
		+	Sh deb
		+	Term no mon
		+
		+	Clear log before placing call:
		+
		+	Clear logg
		+
		+	Then place the call and get content of the buffer as:
		+
		+	Show logg
		+
		+	Please send the log in simple TXT format attached to the e-mail in simple TXT format with extension".TXT".
		+	Please include attach@cisco.com in CC to get logs and e-mail attached to case notes.
		+
		+
		+	Enjoy :)

	==Show running-config==		==Show running-config==

Msamarts: /* Configuration */

2011-02-08T12:01:02Z

Configuration

← Older revision		Revision as of 12:01, 8 February 2011
Line 30:		Line 30:

	!		!
-		+	voice service voip
-	voice service voip	+	h323
-	h323	+	emptycapability
-	emptycapability	+	h225 h245-address on-connect
-	h225 h245-address on-connect	+	call start slow
-	call start slow	+	h245 tunnel disable
-	h245 tunnel disable	+	h245 timeout olc 30
-	h245 timeout olc 30	+
	!		!

Msamarts: /* Configuration */

2011-02-08T12:00:05Z

Configuration

← Older revision		Revision as of 12:00, 8 February 2011
Line 30:		Line 30:

	!		!
		+
	voice service voip		voice service voip
	h323		h323

Msamarts: /* Configuration */

2011-02-08T11:58:39Z

Configuration

← Older revision		Revision as of 11:58, 8 February 2011
Line 28:		Line 28:

	The matching GW config will be:		The matching GW config will be:
		+
		+	!
		+	voice service voip
		+	h323
		+	emptycapability
		+	h225 h245-address on-connect
		+	call start slow
		+	h245 tunnel disable
		+	h245 timeout olc 30
		+	!
		+
		+	Formally you will need only slow start and OLC timeout tuning. Because it may take some time for all ISDN secondary calls to get connected and for the BAS and codec negotiation to start, we need allow voip side to wait for some time. The 30 second timeout is reasonable setting, if we are talking about some VT like Tandberg or Polycom, they will have that settings by default. But if you have CallManager on IP side, you need to tune that timeouts via Service parameters:
		+
		+	H245 TCS Timeout 30
		+
		+	Media Exchange Interface Capability Timer 30
		+
		+	Media Exchange Timer 30
		+
		+	You may also consider to un-check the check-box on the GW config page:
		+
		+	"Wait for Far End H.245 Terminal Capability Set"
		+
		+	It usually good practice explicitly specify which interface will be used for H.323 signaling and if you register the GW to GK you will need to configure:

	!		!
Line 100:		Line 124:
	!		!

-	7. This part is required to accept the incoming video calls, we need to have to provide the secondary numbers to the calling party, so they can call us on that numbers to add more bandwidth to the video call, that numbers will be sent out during ISO 13871 bonding stage.	+	7. This part is required to accept the incoming video calls, we need to have to provide the secondary numbers to the calling party, so they can call us on that numbers to add more bandwidth to the video call, that numbers will be sent out during ISO 13871 bonding stage. According to ISO 13871 only 7 digits will be sent. So there is no need or sense to configure more then 7 digits in the pool config. But you can configure less then 7 digits. The secondary called number will be crated from the primary called number by replacing the last digits with the numbers from the pool. So in case when only last 1 or 2 digits are different, you pool may have only 1 or 2 digit numbers in it.

	!		!
Line 146:		Line 170:
	dtmf-relay h245-alphanumeric		dtmf-relay h245-alphanumeric
	!		!
-

	==Related show Commands==		==Related show Commands==

Jkratky: /* Related Information */

2010-06-23T17:10:12Z

Related Information

← Older revision		Revision as of 17:10, 23 June 2010
Line 204:		Line 204:

	<!--Add appropriate categories-->		<!--Add appropriate categories-->
-
-	~~[[Category:Configuration Examples]]~~
	[[Category:VoIP Configuration Examples]]		[[Category:VoIP Configuration Examples]]
	[[Category:Video Configuration Examples]]		[[Category:Video Configuration Examples]]

Msamarts at 17:30, 7 June 2010

2010-06-07T17:30:24Z

← Older revision		Revision as of 17:30, 7 June 2010
Line 205:		Line 205:
	<!--Add appropriate categories-->		<!--Add appropriate categories-->

-	~~[[Category:example]]~~
-	~~[[Category:video]]~~
-	~~[[Category:H.320]]~~
-	~~[[Category:ISR]]~~
-	~~[[Category:2800]]~~
-	~~[[Category:gatekeeper]]~~
-	~~[[Category:config]]~~
-	~~[[Category:VoIP Configuration Examples]]~~
	[[Category:Configuration Examples]]		[[Category:Configuration Examples]]
		+	[[Category:VoIP Configuration Examples]]
	[[Category:Video Configuration Examples]]		[[Category:Video Configuration Examples]]

Msamarts at 17:47, 5 June 2010

2010-06-05T17:47:37Z

← Older revision		Revision as of 17:47, 5 June 2010
Line 214:		Line 214:
	[[Category:VoIP Configuration Examples]]		[[Category:VoIP Configuration Examples]]
	[[Category:Configuration Examples]]		[[Category:Configuration Examples]]
		+	[[Category:Video Configuration Examples]]

Msamarts: Video on ISR 2800 3800 H.320 with ISO 13871 bonding Configuration Example moved to Video on ISR 2800 3800 H.320 GW with ISO 13871 bonding Configuration Example: Video category

2010-06-05T17:10:34Z

Video on ISR 2800 3800 H.320 with ISO 13871 bonding Configuration Example moved to Video on ISR 2800 3800 H.320 GW with ISO 13871 bonding Configuration Example: Video category

← Older revision

Revision as of 17:10, 5 June 2010

Msamarts at 17:09, 5 June 2010

2010-06-05T17:09:16Z

← Older revision		Revision as of 17:09, 5 June 2010
Line 11:		Line 11:
	==Configuration==		==Configuration==

-	1. First we need to register GW and the video endpoint to the GK.	+	1. First we need to register GW and the video endpoint to the GK, we can run GK feature on the same router if we have IOS with GK feature for example - C2800NM-IPVOICE_IVS-M.
	The most simple setup will be if we register endpoing with full E164 number and GW with the tech prefix, chousen in a way it will allow dialing to PSTN without any number transformation.		The most simple setup will be if we register endpoing with full E164 number and GW with the tech prefix, chousen in a way it will allow dialing to PSTN without any number transformation.
	Assume PSTN will requre 00 for international call, in this case we can use the following config on GK:		Assume PSTN will requre 00 for international call, in this case we can use the following config on GK:
Line 17:		Line 17:
	!		!
	gatekeeper		gatekeeper
-	zone local video-98 mappets.com 10.52.218.98	+	zone local video-98 mappets.com 10.52.218.98
-	no use-proxy video-98 default inbound-to terminal	+	no use-proxy video-98 default inbound-to terminal
-	no use-proxy video-98 default outbound-from terminal	+	no use-proxy video-98 default outbound-from terminal
	no shutdown		no shutdown
	!		!
Line 31:		Line 31:
	!		!
	interface FastEthernet0/0		interface FastEthernet0/0
-	ip address 10.52.218.91 255.255.255.0	+	ip address 10.52.218.91 255.255.255.0
-	h323-gateway voip interface	+	h323-gateway voip interface
-	h323-gateway voip id video-98 ipaddr 10.52.218.98 1719	+	h323-gateway voip id video-98 ipaddr 10.52.218.98 1719
-	h323-gateway voip h323-id ios-91-to-98	+	h323-gateway voip h323-id ios-91-to-98
-	h323-gateway voip tech-prefix 00	+	h323-gateway voip tech-prefix 00
-	h323-gateway voip bind srcaddr 10.52.218.91	+	h323-gateway voip bind srcaddr 10.52.218.91
	!		!
	gateway		gateway
Line 63:		Line 63:

	controller E1 1/0		controller E1 1/0
-	pri-group timeslots 1-31	+	pri-group timeslots 1-31
-	description >>>>> Test of NEW BT PRI ports - out 338898 *** <<<<<	+	description >>>>> Test of NEW BT PRI ports - out 338898 *** <<<<<
	!		!

Line 71:		Line 71:
	!		!
	interface Serial1/0:15		interface Serial1/0:15
-	description >>>>> Test of NEW BT PRI ports - out 338898 *** <<<<<	+	description >>>>> Test of NEW BT PRI ports - out 338898 *** <<<<<
-	no ip address	+	no ip address
-	encapsulation hdlc	+	encapsulation hdlc
-	isdn switch-type primary-net5	+	isdn switch-type primary-net5
-	isdn map address .* plan unknown type unknown	+	isdn map address .* plan unknown type unknown
-	isdn negotiate-bchan resend-setup	+	isdn negotiate-bchan resend-setup
-	isdn bchan-number-order ascending	+	isdn bchan-number-order ascending
-	isdn sending-complete	+	isdn sending-complete
-	isdn integrate calltype all	+	isdn integrate calltype all
-	no cdp enable	+	no cdp enable
	!		!

Line 88:		Line 88:
	!		!
	voice class codec 1000		voice class codec 1000
-	codec preference 1 g711ulaw	+	codec preference 1 g711ulaw
-	codec preference 2 g711alaw	+	codec preference 2 g711alaw
-	codec preference 3 g728	+	codec preference 3 g728
-	codec preference 4 g722-64	+	codec preference 4 g722-64
-	codec preference 5 g722-56	+	codec preference 5 g722-56
-	codec preference 6 g722-48	+	codec preference 6 g722-48
-	video codec h261	+	video codec h261
-	video codec h263	+	video codec h263
-	video codec h263+	+	video codec h263+
-	video codec h264	+	video codec h264
	!		!

Line 118:		Line 118:
	!		!
	dial-peer voice 99 pots		dial-peer voice 99 pots
-	description default incoming video dial-peer	+	description default incoming video dial-peer
-	information-type video	+	information-type video
-	incoming called-number 313300	+	incoming called-number 313300
-	bandwidth maximum 384	+	bandwidth maximum 384
-	direct-inward-dial	+	direct-inward-dial
	!		!

	!		!
	dial-peer voice 9001 pots		dial-peer voice 9001 pots
-	description default outgoing video dial-peer	+	description default outgoing video dial-peer
-	destination-pattern 00	+	destination-pattern 00
-	information-type video	+	information-type video
-	bandwidth maximum 384	+	bandwidth maximum 384
-	port 1/0:15	+	port 1/0:15
-	forward-digits all	+	forward-digits all
	!		!

Line 139:		Line 139:
	!		!
	dial-peer voice 770 voip		dial-peer voice 770 voip
-	description default incoming/outgoing voip dial-peer for all calls from GK w	+	description default incoming/outgoing voip dial-peer for all calls from GK w
-	destination-pattern 701...	+	destination-pattern 701...
-	voice-class codec 1000	+	voice-class codec 1000
-	session target ras	+	session target ras
-	incoming called-number 00.	+	incoming called-number 00.
-	dtmf-relay h245-alphanumeric	+	dtmf-relay h245-alphanumeric
	!		!

Line 207:		Line 207:
	[[Category:example]]		[[Category:example]]
	[[Category:video]]		[[Category:video]]
		+	[[Category:H.320]]
	[[Category:ISR]]		[[Category:ISR]]
	[[Category:2800]]		[[Category:2800]]