User Data Resync does not Show Results Properly if User Name has 1 or 2
From DocWiki
(Difference between revisions)
(New page: {| border="1" |- ! '''Problem Summary''' | Consider telephony user with _1 or _2 in the User Prefix, Eg: jtapi_150 or jtapi_250. Perform Data check or data Resync for telephony User , the...) |
m (1 revision) |
Revision as of 06:07, 3 March 2011
| Problem Summary | Consider telephony user with _1 or _2 in the User Prefix, Eg: jtapi_150 or jtapi_250. Perform Data check or data Resync for telephony User , the data check or resync will not show any results for telephony user under node 1 if it has "_1" or under node 2 if has "_2". |
|---|---|
| Error Message | NA |
| Possible Cause | Functionality will work as expected in the background but result is not displayed properly in the UI . |
| Recommended Action | |
| Release | Release 8.5(1) |
| Associated CDETS # | CSCtk05045 |
