User Data Resync Does Not Show Results Properly if User Name has 1 or 2

From DocWiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
-
#REDIRECT [[User Data Resync does not Show Results Properly if User Name has 1 or 2]]
+
{| border="1"
 +
|-
 +
! '''Problem Summary'''
 +
| Consider telephony user with _1 or _2 in the User Prefix, Eg: jtapi_150 or jtapi_250. Perform Data check  or data Resync for telephony User , the data check or resync will not show any results for telephony user under node 1 if it has "_1" or under node 2 if has "_2".
 +
|-
 +
! '''Error Message'''
 +
| NA
 +
|-
 +
! '''Possible Cause'''
 +
| Functionality will work as expected in the background but result is not displayed properly in the UI .
 +
|-
 +
! '''Recommended Action'''
 +
| NA
 +
|-
 +
! '''Release'''
 +
| Release 8.5(1)
 +
|-
 +
! '''Associated CDETS #'''
 +
| CSCtk05045
 +
|-
 +
|}
 +
 
 +
[[Category:Unified CCX, Release 8.5]]

Revision as of 06:34, 28 March 2011

Problem Summary Consider telephony user with _1 or _2 in the User Prefix, Eg: jtapi_150 or jtapi_250. Perform Data check or data Resync for telephony User , the data check or resync will not show any results for telephony user under node 1 if it has "_1" or under node 2 if has "_2".
Error Message NA
Possible Cause Functionality will work as expected in the background but result is not displayed properly in the UI .
Recommended Action NA
Release Release 8.5(1)
Associated CDETS # CSCtk05045

Rating: 0.0/5 (0 votes cast)

Personal tools