Unified Communications System Troubleshooting

From DocWiki

(Difference between revisions)
Jump to: navigation, search
 
(3 intermediate revisions not shown)
Line 1: Line 1:
 +
[[Cisco Unified Communications| '''Back to:''' Cisco Unified Communications ]]
 +
 +
<small>''This information applies to all Cisco Unified Communications System releases.''</small>
<small>''This information applies to all Cisco Unified Communications System releases.''</small>
Line 28: Line 31:
-
<small>''Have you had experience troubleshooting Cisco Unified Communications equipment? Can you expand on this topic? Please contribute to this wiki and share the tools and techniques you used. Guidelines for submitting content are available on the [[DocWiki:About|About DocWiki]] pages.''</small>
+
<small>''Have you had experience troubleshooting Cisco Unified Communications equipment? Can you expand on this topic? Please contribute to this wiki and share the tools and techniques you used by sending E-mail to [mailto:sysdocwiki@cisco.com sysdocwiki@cisco.com]. Guidelines for submitting content are available on the [[DocWiki:About|About DocWiki]] pages.''</small>

Latest revision as of 18:05, 24 August 2012

Back to: Cisco Unified Communications


This information applies to all Cisco Unified Communications System releases.

Troubleshooting networking equipment at a system level requires solid detective skills. When a problem occurs, the list of potential suspects is long. You must collect detailed information and systematically narrow the list of potential causes to determine the root problem. To organize this process, and to follow the practice of starting with a broad problem symptom and narrowing the focus to the possible devices that are causing the problem, the troubleshooting information in this Wiki will be presented in structured tables similar to the one shown below:


General Problem Area General Symptom Specific Indicators Possible Culprit
Broad statement of the problem (for example, calls failing) More specific problem case #1 (for example, calls not reaching a connected state How the problem is reported and/or where to get more details on the problem (for example, alarm/alert notifications, error messages in log files, and so forth) Device(s) that may be misconfigured or not operating properly (for example, incorrect routing instructions in Unified Communications Manager). Device-specific diagnostic tools and troubleshooting steps will be presented in separate product articles with links from this table.
More specific problem case #2 (for example, calls routed to wrong agent in a call center environment) How the problem is reported and/or where to get more details on the problem (for example, alarm/alert notifications, error messages in log files, and so forth) Device(s) that may be misconfigured or not operating properly (for example, bad ICM scripts). Device-specific diagnostic tools and troubleshooting steps will be presented in an article with links from this table.


Cisco Unified Communications system-level troubleshooting information in this wiki is divided into the following sections:


Have you had experience troubleshooting Cisco Unified Communications equipment? Can you expand on this topic? Please contribute to this wiki and share the tools and techniques you used by sending E-mail to sysdocwiki@cisco.com. Guidelines for submitting content are available on the About DocWiki pages.

Rating: 0.0/5 (0 votes cast)

Personal tools