Unified CVP: System CLI: System mode takes a long time for initialization on first attempt or "system init"
Revision as of 19:58, 11 March 2011 by Cchetty
System CLI: System mode takes a long time for initialization on first attempt or "system init"
|Problem Summary||System mode takes a long time to complete on the first attempt or after issuing the "system init" command.|
|Error Message||No specific error message.|
|Possible Cause||In general, this process takes a long time as the System CLI needs to access each device on the device list to authenticate access and obtain initialization data. The wait could be magnified if there are a lot of devices in the device list are offline. The System CLI has to wait for network timeout when connect to these offline devices.|
|Recommended Action||Make sure devices on the device list are online and take offline devices off the device list. Device list contains devices configured in the Operation Console.|
|Associated CDETS #||None.|