Unified CVP: System CLI: Command takes long time to complete

From DocWiki

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
m (1 revision)
(One intermediate revision not shown)
Line 1: Line 1:
== <Tip Title> ==
== System CLI command takes long time to complete  ==
{| border="1"
{| border="1"
Line 26: Line 26:
[[Category:Unified CVP, Release 8.0]]
[[Category:Unified CVP, Release 8.0]]
[[Category:Unified CVP 8.x Troubleshooting]]

Latest revision as of 19:58, 11 March 2011

System CLI command takes long time to complete

Problem Summary A command takes long time to complete
Error Message No specific error message.
Possible Cause The System CLI is run on a system with high load or CVP solution devices are under high load.

System CLI runs at the idle prority. That means it only uses CPU when there is available idle time. If the system is busy with other tasks, the system CLI will be CPU starve. This is by design as we do not want the System CLI to have any impact to call processing.

Recommended Action Cancel the request and run the command at a time when the system load is low.
Release 8.0(1) and later
Associated CDETS # None.

Rating: 0.0/5 (0 votes cast)

Personal tools