Unified CVP: Call Server - Multiple valid licenses are chosen at random

From DocWiki

Revision as of 19:11, 3 November 2010 by Dshtokma (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Call Server - Multiple valid licenses are chosen at random

Problem Summary A valid license has been transferred to a Call Server. Then, another valid license with a different number of ports is transferred to the same Call Server. The Call Server is restarted using the Operations Console. The available number of ports shown in the diag servlet does not correspond to the number of ports in the most recently transferred license. The number of ports shown comes from one of the two valid licenses randomly. The problem occurs as long as both licenses are valid and regardless of whether they expire on the same day.
Error Message No error message. If you run the diag servlet http://localhost:8000/cvp/diag, under Licensed PortManager : TOTAL [license_number] AVAIL [license_number] IN USE [0]

license_number will not be the number of ports from the most recent license transfer, but the number of ports from an earlier license transfer.

Possible Cause Multiple valid Call Server licenses with different port numbers are contained in the cvp.license file located in C:\Cisco\CVP\conf\license.
Recommended Action If other licenses (SW, Reporting Server, VXML Server) are saved in the Operations Console, delete the cvp.license file located in C:\Cisco\CVP\conf\license. Then transfer the licenses for all the components again.

If other licenses for other components are not saved in the Operations Console, then open the cvp.license file and remove all paragraphs that contain "CVPPorts cisco" at the beginning. Once all such paragraphs are removed, transfer a Call Server license again.

Release Found in 8.5(1)
Associated CDETS # CSCtj84394

Rating: 0.0/5 (0 votes cast)

Personal tools