UCM Telephony SS in partial service on a node
From DocWiki
(Difference between revisions)
Srib (Talk)
(New page: == UCM Telephony SS in partial service after fall back to Node1 == {| border="1" |- ! '''Problem Summary''' | UCM Telephony SS in partial service on a Node |- ! '''Error Message''' | Unif...)
Newer edit →
(New page: == UCM Telephony SS in partial service after fall back to Node1 == {| border="1" |- ! '''Problem Summary''' | UCM Telephony SS in partial service on a Node |- ! '''Error Message''' | Unif...)
Newer edit →
Revision as of 00:43, 30 January 2010
UCM Telephony SS in partial service after fall back to Node1
| Problem Summary | UCM Telephony SS in partial service on a Node |
|---|---|
| Error Message | Unified CCX Engine -> Unified CM Telephony subsystem is in partial service on a node.
|
| Possible Cause | During the initial HA setup, there may have been an error in creating a JTAPI user on that node due to such a JTAPI user already existing in CUCM. So the set of CTI ports for a call control group may not have been created on that node. |
| Recommended Action | Delete the call control group from this node and see if the Unified CM Telelphony SS should comes into service. |
| Release | Release 8.0(1) onwards |
| Associated CDETS # |
