Turning on IPVMS Traces

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(New page: == Turning on IPVMS traces == {| border="1" |- ! '''Problem Summary''' | For any IPVMS Driver related issues the DriverMap.txt and "message" traces are required. This tip explains how to ...)
m (1 revision)

Revision as of 15:21, 9 April 2010

Turning on IPVMS traces

Problem Summary For any IPVMS Driver related issues the DriverMap.txt and "message" traces are required. This tip explains how to run the CLI commands to get those traces.
Error Message NA
Possible Cause NA
Recommended Action
  1. Go to CLI
  2. Type the CLI command 'show media streams count 5 sleep 5 trace', which captures media streams.
  3. These can be viewed using:"file view activelog /platform/log/mediainfo.txt"
  4. Additional trace information may be viewed by using: "file view activelog /syslog/messages"
  5. or
  6. Get the Remote Access, type DriverMonitor -T0 (run the scenario, do ctrl+c to stop) and collect the DriverMap.txt from current directory.
  7. And get the /var/log/active/syslog/messages file


After the traces are turned on and the scenario is simulated, collect the DriverMap and messages logs.

Release Release 8.0(1)
Associated CDETS # NA

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/Turning_on_IPVMS_Traces"
Personal tools