Troubleshooting JTAPI CCN Exceptions

From DocWiki

Revision as of 01:26, 30 January 2010 by Srib (Talk)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Troubleshooting JTAPI CCN Exceptions

Problem Summary A JTAPI CCN Exceptions is seen in MIVR logs during call processing. Most often this exception will be due to an issue in CTI/JTAPI and can be directly escalated to JTAPI/CTI teams without first escalating it to Unified CCX team. Below is a list of JTAPI/CTI exceptions that can be encountered during call processing and the possible resolutions for the same.
Error Message A JTAPI Exception was seen in MIVR logs.
Possible Cause A JTAPI Exception was seen in MIVR logs during call processing.
Recommended Action

    Please check what the error code of the exception indicates and its the suggested resolution.
    A list of CTI error codes is also present at the end.


    CTIERR_UNSPECIFIED
    1. Description
    Unspecified error
    2. Causes
    This specifies any CTI error code that is not handled by JTAPI client. It could be a new CTI error that the JTAPI client is unaware of. It may also be that the JTAPI client being used is an old one.
    3. Resolutions
    Collect the MIVR logs, JTAPI trace and CTI Manager trace. This will help to detect what error code was received by JTAPI from CTI. To begin with, contact CCBU for further help if logs do not lead to root cause.



    CTIERR_TIMEOUT
    1. Description
    CTI request timed out for some reason.
    2. Causes
    This indicates that there was a timeout on one of the following: - JTAPI sent a request to CTI - CTI sent a request to JTAPI This could also be due to timing or performance issue on the client side.
    3. Resolutions
    Collect the MIVR logs, JTAPI trace and CTI Manager trace and contact CCBU for further help if logs do not lead to root cause.



    CTIERR_ILLEGAL_HANDLE
    1. Description
    Handle is unknown to the system
    2. Causes
    Possible causes are: When a call handle is no longer available. When some feature that is needed is turned off by CCM. When there are any performance issues on the client side.
    3. Resolutions
    Collect the MIVR logs, JTAPI trace and CTI Manager trace and contact CCBU for further help if logs do not lead to root cause.



    CTIERR_ILLEGAL_CALLSTATE
    1. Description
    Line is not in a legal state to invoke the command
    2. Causes
    An operation was performed on a call when the call was not in the correct state to handle it.
    3. Resolutions
    Collect the MIVR logs, JTAPI trace and CTI Manager trace and contact CCBU for further help if logs do not lead to root cause.




    CTIERR_TRANSFERFAILED_DESTINATION_UNALLOCATED
    1. Description
    Attempt to transfer to a directory number that is not registered
    2. Causes
    Try to set up transfer without specifying the transfer destination for blind transfer.
    3. Resolutions
    Check if the destination is valid.



    CTIERR_TRANSFERFAILED_DESTINATION_BUSY
    1. Description
    Attempt to transfer to a busy destination
    2. Causes
    Transfer to a busy destination
    3. Resolutions
    Check if destination was busy at that time and try to transfer again



    CTIERR_TRANSFERFAILED
    1. Description
    Transfer failed
    2. Causes
    Probable cause is one of the call legs was hung up or disconnected from the far end. The calling party may have hung up or media establishment could have failed
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace. Contact IPCBU for further help if logs do not lead to root cause..



    CTIERR_HOLDFAILED
    1. Description
    Hold was rejected by line control or call control
    2. Causes
    This indicates some problem on the CCM side. Could be related to timing or shared lines
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs. Contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_RETRIEVEFAILED
    1. Description
    Retrieve was rejected by line control or call control
    2. Causes
    This indicates some problem on the CCM side. Could be related to timing or shared lines or media establishment.
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs. Contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_ASSOCIATED_LINE_NOT_OPEN
    1. Description
    Command issued on a line that must be open
    2. Causes
    Mismatch between CTI manager and JTAPI. JTAPI thinks line is open when it is not. Normally, this should not happen.
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_CALL_DOES_NOT_EXIST
    1. Description
    Attempt to redirect a call that does not exist or is no longer active
    2. Causes
    CCM lost the call. This could be because of a timing issue or performance issue or configuration issue. Could happen when supposing there are two JTAPI clients and if one of them redirects, the other gets this error.
    3. Resolutions
    Check the configuration to see if there is more than one JTAPI client. Collect the JTAPI trace and CTI Manager trace and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_ERR
    1. Description
    Internal error returned from call control
    2. Causes
    Redirect failed from CCM. Could be because of media mismatch or location mismatch
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_CALL_UNKNOWN_DESTINATION
    1. Description
    Attempt to redirect to an unknown destination
    2. Causes
    Destination may not be valid
    3. Resolutions
    Check if the destination is valid.



    CTIERR_REDIRECT_CALL_DIGIT_ANALYSIS_TIMEOUT
    1. Description
    Internal error returned from call control
    2. Causes
    This indicated some problem on the CCM side.
    3. Resolutions
    Collect CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_CALL_MEDIA_CONNECTION_FAILED
    1. Description
    Internal error returned from call control
    2. Causes
    Media couldn't be established
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause..


    CTIERR_REDIRECT_CALL_ORIGINATOR_ABANDONED
    1. Description
    Far end hung up on the call being redirected
    2. Causes
    Far end hung up on the call being redirected
    3. Resolutions
    None



    CTIERR_REDIRECT_CALL_UNKNOWN_PARTY
    1. Description
    Internal error returned from call control
    2. Causes
    Call redirected to unknown destination
    3. Resolutions
    Check if the destination is valid.



    CTIERR_REDIRECT_CALL_INCOMPATIBLE_STATE
    1. Description
    Internal error returned from call control
    2. Causes
    This could be a problem on the CCM side
    3. Resolutions
    Collect CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_CALL_UNKNOWN_ERROR
    1. Description
    Internal error returned from call control
    2. Causes
    This could be a problem on the CCM side
    3. Resolutions
    Collect CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_REDIRECT_CALL_DESTINATION_BUSY
    1. Description
    Redirect destination is busy
    2. Causes
    The redirect destination is busy.
    3. Resolutions
    Check if the destination was busy at that time and try again.


    CTIERR_REDIRECT_CALL_DESTINATION_OUT_OF_ORDER
    1. Description
    Redirect destination is out of order
    2. Causes
    Redirect destination is out of order
    3. Resolutions
    Check if the destination is out of order.


    CTIERR_TRANSFERFAILED_OUTSTANDING_TRANSFER
    1. Description
    Existing transfer is still in progress
    2. Causes
    Two applications issuing transfer at the same time. This shouldn't happen normally.
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_TRANSFERFAILED_CALLCONTROL_TIMEOUT
    1. Description
    Expected response from call control not received during a transfer
    2. Causes
    Timeout. Did not receive success or failure. This is a CTI error
    3. Resolutions
    Collect CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_CALLHANDLE_UNKNOWN_TO_LINECONTROL
    1. Description
    Attempt to redirect call that was unknown to line control
    2. Causes
    Line /device are not registered.
    3. Resolutions
    Check if line/device is registered



    CTIERR_INCOMPATIBLE_PROTOCOL_VERSION
    1. Description
    JTAPI and CTI versions are not compatible: CtiError Protocol version not supported
    2. Causes
    The JTAPI client and CTI may be incompatible.
    3. Resolutions
    Check for compatibility.



    CTIERR_PROVIDER_NOT_OPEN
    1. Description
    Device List incomplete or Device List query timeout or Query aborted
    2. Causes
    This could be an issue with the CTI manager.
    3. Resolutions
    Restart client and CTI manager.



    CTIERR_CFWDALL_DESTN_INVALID
    1. Description
    Attempt to CFWALL to invalid destination
    2. Causes
    The CFWALL destination may be invalid
    3. Resolutions
    Check the configuration to see if the Call-Forward-All destination is valid.



    CTIERR_DEVICE_OUT_OF_SERVICE
    1. Description
    Device is out of service
    2. Causes
    Phone or line is out of service
    3. Resolutions
    Check if the device is out of service.



    CTIERR_ILLEGAL_DEVICE_TYPE
    1. Description
    Illegal Device Type
    2. Causes
    Certain special operations can be performed on certain devices only
    3. Resolutions
    None



    CTIERR_CALL_REQUEST_ALREADY_OUTSTANDING
    1. Description
    Call Request already outstanding
    2. Causes
    Attempt to redirect when redirect is already in progress or try to record/monitor while recording or monitoring session already requested by application
    3. Resolutions
    Wait and try again.



    CTIERR_CONSULT_CALL_FAILURE
    1. Description
    Consult Call Failure
    2. Causes
    Consult failed during Transfer/Conference scenario
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs to check why it failed and contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_DEVICE_SHUTTING_DOWN
    1. Description
    Device Shutting Down
    2. Causes
    This may be a phone issue
    3. Resolutions
    None



    CTIERR_UNKNOWN_EXCEPTION
    1. Description
    CTI Unknown Exception
    2. Causes
    This could be an issue with CTI.
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause..



    CTIERR_INVALID_LINE_HANDLE
    1. Description
    Attempt to do line operation on invalid line handle
    2. Causes
    This could be because of some mismatch in JTAPI and CTI.
    3. Resolutions
    Collect the JTAPI trace and CTI Manager trace and CCM logs and contact IPCBU for further help if logs do not lead to root cause.


    CTIERR_OPERATION_NOT_ALLOWED
    1. Description
    Operation not allowed
    2. Causes
    The operation is not allowed on the line or the call. One of example is no feature allowed for Intercom call. You can not conference, transfer or redirect an Intercom call.
    3. Resolutions
    Do not issue the unsupported request



    CTIERR_MEDIA_CAPABILITY_MISMATCH
    1. Description
    Device registration failed as device capability does not match with current device registration
    2. Causes
    This typically happens for dynamic media termination when second application tries to register device with different media capability.
    3. Resolutions
    Provide same capability that first application registered with.



    CTIERR_LINE_OUT_OF_SERVICE
    1. Description
    Line out of service
    2. Causes
    Could be due to device reset
    3. Resolutions
    Wait for device/line to come in service



    CTIERR_MAXCALL_LIMIT_REACHED
    1. Description
    Max number of allowed calls configured on the line has been reached.
    2. Causes
    Try to make call when there is already maximum calls available on the line
    3. Resolutions
    Wait until number of calls gets reduced.



    CTIERR_REDIRECT_CALL_DOES_NOT_EXIST
    1. Description
    The original call does not exist during redirect operation
    2. Causes
    Original call dropped
    3. Resolutions
    Check JTAPI/CTI/CCM log, and see why original call dropped. It could be original call dropped normally, or could be some issue where call was not accepted promptly before redirect. Contact IPCBU for further help if logs do not lead to root cause.



    CTIERR_PROVIDER_ALREADY_OPEN
    1. Description
    Attempt to reopen a provider
    2. Causes
    The provide is already open
    3. Resolutions
    Do not reopen the same provider



    List of CTI Error Codes
    TIMEOUT = 0x8CCC0001
    NO_ACTIVE_DEVICE_FOR_THIRDPARTY = 0x8CCC0002
    EXISTING_FIRSTPARTY = 0x8CCC0003
    ILLEGAL_HANDLE = 0x8CCC0004
    UNDEFINED_LINE = 0x8CCC0005
    ILLEGAL_CALLINGPARTY = 0x8CCC0006
    CALL_ALREADY_EXISTS = 0x8CCC0007
    LINECONTROL_FAILURE = 0x8CCC0008
    ILLEGAL_CALLSTATE = 0x8CCC0009
    CALLHANDLE_NOTINCOMINGCALL = 0x8CCC000A
    TRANSFERFAILED_DESTINATION_UNALLOCATED = 0x8CCC000B
    TRANSFERFAILED_DESTINATION_BUSY = 0x8CCC000D
    TRANSFERFAILED = 0x8CCC000E
    HOLDFAILED = 0x8CCC000F
    RETRIEVEFAILED = 0x8CCC0011
    DB_NO_MORE_DEVICES = 0x8CCC0012
    DEVICE_ALREADY_REGISTERED = 0x8CCC0013
    DB_ILLEGAL_DEVICE_TYPE = 0x8CCC0014
    DB_ERROR = 0x8CCC0015
    CANNOT_TERMINATE_MEDIA_ON_PHONE = 0x8CCC0016
    CTIERR_CALL_MANAGER_NOT_AVAILABLE = 0x8CCC0017
    CTIERR_ACCESS_TO_DEVICE_DENIED = 0x8CCC0018
    UNKNOWN_GLOBAL_CALL_HANDLE = 0x8CCC0019
    DEVICE_NOT_OPEN = 0x8CCC001A
    ASSOCIATED_LINE_NOT_OPEN = 0x8CCC001B
    SSAPI_NOT_REGISTERED = 0x8CCC001C
    REDIRECT_CALL_DOES_NOT_EXIST = 0x8CCC001D
    DEVICE_NOT_REGISTERED = 0x8CCC001E
    DATA_SIZE_LIMIT_EXCEEDED = 0x8CCC001F
    INVALID_RING_OPTION = 0x8CCC0020
    CTIERR_APP_SOFTKEYS_ALREADY_CONTROLLED = 0x8CCC0021
    CTIERR_INVALID_DEVICE_NAME = 0x8CCC0022
    CTIERR_INFORMATION_NOT_AVAILABLE = 0x8CCC0023
    CTIERR_MEDIA_RESOURCE_NAME_SIZE_EXCEEDED = 0x8CCC0024
    CTIERR_APPLICATION_DATA_SIZE_EXCEEDED = 0x8CCC0025
    CTIERR_INVALID_MEDIA_DEVICE = 0x8CCC0026
    CTIERR_CLOSE_DELAY_NOT_SUPPORTED_WITH_REG_TYPE = 0x8CCC0027
    REDIRECT_CALLINFO_ERR = 0x8CCC0030
    REDIRECT_ERR = 0x8CCC0031
    REDIRECT_CALL_CALL_TABLE_FULL = 0x8CCC0032
    REDIRECT_CALL_PROTOCOL_ERROR = 0x8CCC0033
    REDIRECT_CALL_UNKNOWN_DESTINATION = 0x8CCC0034
    REDIRECT_CALL_DIGIT_ANALYSIS_TIMEOUT = 0x8CCC0035
    REDIRECT_CALL_MEDIA_CONNECTION_FAILED = 0x8CCC0036
    REDIRECT_CALL_PARTY_TABLE_FULL = 0x8CCC0037
    REDIRECT_CALL_ORIGINATOR_ABANDONED = 0x8CCC0038
    REDIRECT_CALL_UNKNOWN_PARTY = 0x8CCC0039
    REDIRECT_CALL_INCOMPATIBLE_STATE = 0x8CCC003A
    REDIRECT_CALL_PENDING_REDIRECT_TRANSACTION = 0x8CCC003B
    REDIRECT_CALL_UNKNOWN_ERROR = 0x8CCC003C
    REDIRECT_CALL_NORMAL_CLEARING = 0x8CCC003D
    REDIRECT_CALL_UNRECOGNIZED_MANAGER = 0x8CCC003E
    REDIRECT_CALL_DESTINATION_BUSY = 0x8CCC003F
    REDIRECT_CALL_DESTINATION_OUT_OF_ORDER = 0x8CCC0040
    CANNOT_OPEN_DEVICE = 0x8CCC0041
    TRANSFERFAILED_OUTSTANDING_TRANSFER = 0x8CCC0042
    TRANSFERFAILED_CALLCONTROL_TIMEOUT = 0x8CCC0043
    CALLHANDLE_UNKNOWN_TO_LINECONTROL = 0x8CCC0044
    OPERATION_NOT_AVAILABLE_IN_CURRENT_STATE = 0x8CCC0045
    CONFERENCE_FULL = 0x8CCC0046
    MAX_NUMBER_OF_CTI_CONNECTIONS_REACHED = 0x8CCC0047
    CTIERR_CONSULTCALL_ALREADY_OUTSTANDING = 0x8CCC0048
    CTIERR_NO_CONFERENCE_BRIDGE = 0x8CCC0049
    TEMPORARY_FAILURE = 0x8CCC004F
    INCOMPATIBLE_PROTOCOL_VERSION = 0x8CCC0050
    UNRECOGNIZABLE_PDU = 0x8CCC0051
    ILLEGAL_MESSAGE_FORMAT = 0x8CCC0052
    CTIERR_INCOMPATIBLE_AUTOINSTALL_PROTOCOL_VERSION = 0x8CCC0053
    CTIERR_INVALID_MESSAGE_LENGTH = 0x8CCC0054
    CTIERR_INVALID_MESSAGE_HEADER_INFO = 0x8CCC0055
    CTIERR_MESSAGE_TOO_BIG = 0x8CCC0056
    DIRECTORY_TEMPORARY_UNAVAILABLE = 0x8CCC005E
    DIRECTORY_LOGIN_NOT_ALLOWED = 0x8CCC005F
    DIRECTORY_LOGIN_FAILED = 0x8CCC0060
    PROVIDER_NOT_OPEN = 0x8CCC0061
    PROVIDER_ALREADY_OPEN = 0x8CCC0062
    NOT_INITIALIZED = 0x8CCC0063
    CLUSTER_LINK_FAILURE = 0x8CCC0064
    LINE_INFO_DOES_NOT_EXIST = 0x8CCC0065
    DIGIT_GENERATION_ALREADY_IN_PROGRESS = 0x8CCC0066
    DIGIT_GENERATION_WRONG_CALL_HANDLE = 0x8CCC0067
    DIGIT_GENERATION_WRONG_CALL_STATE = 0x8CCC0068
    DIGIT_GENERATION_CALLSTATE_CHANGED = 0x8CCC0069
    RETRIEVEFAILED_ACTIVE_CALL_ON_LINE = 0x8CCC0070
    INVALID_LINE_HANDLE = 0x8CCC0071
    LINE_NOT_PRIMARY = 0x8CCC0072
    CFWDALL_ALREADY_SET = 0x8CCC0073
    CFWDALL_DESTN_INVALID = 0x8CCC0074
    CFWDALL_ALREADY_OFF = 0x8CCC0075
    DEVICE_OUT_OF_SERVICE = 0x8CCC0077
    MSGWAITING_DESTN_INVALID = 0x8CCC0078
    DARES_INVALID_REQ_TYPE = 0x8CCC0079
    CONFERENCE_FAILED = 0x8CCC007A
    CONFERENCE_INVALID_PARTICIPANT = 0x8CCC007B
    CONFERENCE_ALREADY_PRESENT = 0x8CCC007C
    CONFERENCE_INACTIVE = 0x8CCC007D
    TRANSFER_INACTIVE = 0x8CCC007E
    CTIERR_REGISTER_FEATURE_ACTIVATION_FAILED = 0x8CCC007F
    CTIERR_UNSUPPORTED_CALL_PARK_TYPE = 0x8CCC0080
    CTIERR_CALL_UNPARK_FAILED = 0x8CCC0081
    CTIERR_INVALID_PARK_DN = 0x8CCC0082
    CTIERR_INVALID_PARK_REGISTRATION_HANDLE = 0x8CCC0083
    CTIERR_INVALID_MONITOR_DN_TYPE = 0x8CCC0084
    CTIERR_CALL_PARK_NO_DN = 0x8CCC0085
    CTIERR_ILLEGAL_DEVICE_TYPE = 0x8CCC0086
    CTIERR_CALL_REQUEST_ALREADY_OUTSTANDING = 0x8CCC0087
    CTIERR_CONSULT_CALL_FAILURE = 0x8CCC0088
    CTIERR_FEATURE_ALREADY_REGISTERED = 0x8CCC0089
    CTIERR_STATION_SHUT_DOWN = 0x8CCC008A
    CTIERR_INTERNAL_FAILURE = 0x8CCC0090
    CTIERR_MEDIAREGISTRATIONTYPE_DO_NOT_MATCH = 0x8CCC0091
    CTIERR_OPERATION_FAILED_QUIETCLEAR = 0x8CCC0092
    CTIERR_FEATURE_DATA_REJECT = 0x8CCC0093
    CTIERR_PRIMARY_CALL_DROPPED = 0x8CCC0094
    CTIERR_INVALID_DTMFDIGITS = 0x8CCC0097
    CTIERR_INCORRECT_MEDIA_CAPABILITY = 0x8CCC0098
    COMMAND_NOT_IMPLEMENTED_ON_DEVICE = 0x8CCC0099
    CTIERR_DEVICE_SHUTTING_DOWN = 0x8CCC009A
    CTIERR_INVALID_MEDIA_RESOURCE_ID = 0x8CCC009B
    CTIERR_UNKNOWN_EXCEPTION = 0x8CCC009C
    CTIERR_OPERATION_NOT_ALLOWED = 0x8CCC009D
    CTIERR_INVALID_MEDIA_PARAMETER = 0x8CCC009E
    CTIERR_MEDIA_CAPABILITY_MISMATCH = 0x8CCC009F
    CTIERR_DEVICE_ALREADY_OPENED = 0x8CCC00A0
    CTIERR_DEVICE_NOT_OPENED_YET = 0x8CCC00A1
    CTIERR_MEDIA_ALREADY_TERMINATED_NONE = 0x8CCC00A2
    CTIERR_MEDIA_ALREADY_TERMINATED_STATIC = 0x8CCC00A3
    CTIERR_MEDIA_ALREADY_TERMINATED_DYNAMIC = 0x8CCC00A4
    CTIERR_OWNER_NOT_ALIVE = 0x8CCC00A5
    CTIERR_RESOURCE_NOT_AVAILABLE = 0x8CCC00B0
    CTIERR_CONFERENCE_ALREADY_EXISTED = 0x8CCC00B1
    CTIERR_CONFERENCE_NOT_EXISTED = 0x8CCC00B2
    CTIERR_CALL_NOT_EXISTED = 0x8CCC00B3
    CTIERR_INVALID_PARAMETER = 0x8CCC00B4
    CTIERR_MORE_ACTIVE_CALLS_THAN_RESERVED = 0x8CCC00B5
    CTIERR_INVALID_RESOURCE_TYPE = 0x8CCC00B6
    CTIERR_DUPLICATE_CALL_REFERENCE = 0x8CCC00B7
    CTIERR_NOT_PRESERVED_CALL = 0x8CCC00B8
    CTIERR_NO_EXISTING_CONFERENCE = 0x8CCC00B9
    CTIERR_NO_RESPONSE_FROM_MP = 0x8CCC00BA
    CTIERR_SYSTEM_ERROR = 0x8CCC00BB
    CTIERR_REGISTER_FEATURE_PROVIDER_NOT_REGISTERED = 0x8CCC00BC
    CTIERR_REGISTER_FEATURE_APP_ALREADY_REGISTERED = 0x8CCC00BD
    CTIERR_PENDING_ACCEPT_OR_ANSWER_REQUEST = 0x8CCC00C0
    CTIERR_INVALID_MEDIA_PROCESS = 0x8CCC00C1
    CTIERR_CAPABILITIES_DO_NOT_MATCH = 0x8CCC00C2
    CTIERR_DEVICE_OWNER_ALIVE_TIMER_STARTED = 0x8CCC00C3
    CTIERR_MAXCALL_LIMIT_REACHED = 0x8CCC00C4
    CTIERR_CTIHANDLER_PROCESS_CREATION_FAILED = 0x8CCC00C5
    CTIERR_REDIRECT_UNAUTHORIZED_COMMAND_USAGE = 0x8CCC00C7
    CTIERR_NO_EXISTING_CALLS = 0x8CCC00C8
    CTIERR_FAC_CMC_REASON_FAC_NEEDED = 0x8CCC00CA
    CTIERR_FAC_CMC_REASON_CMC_NEEDED = 0x8CCC00CB
    CTIERR_FAC_CMC_REASON_FAC_CMC_NEEDED = 0x8CCC00CC
    CTIERR_FAC_CMC_REASON_FAC_INVALID = 0x8CCC00CD
    CTIERR_FAC_CMC_REASON_CMC_INVALID = 0x8CCC00CE
    CTIERR_PATH_REPLACEMENT_INPROGRESS = 0x8CCC00CF
    PROVIDER_CLOSED = 0xDEADBEEF
    PROTOCOL_TIMEOUT = 0xBEEFBEEF
    SERVER_SHUTDOWN = 0x8DDD0001
    UNSPECIFIED_ERROR = 0x8DDD0002
    HANDLE_ALREADY_OPEN = 0x8DDD0003
    INVALID_HANDLE = 0x8DDD0004
    INVALID_REQUEST = 0x8DDD0005
    DESTINATION_UNKNOWN = 0x8EEE0001
    DESTINATION_BUSY = 0x8EEE0002
    INVALID_PARAMETER = 0x90000000

Release Release 7.0(1) onwards
Associated CDETS # NA

Rating: 1.0/5 (1 vote cast)

Personal tools