Troubleshooting Cisco Prime Infrastructure

From DocWiki

Revision as of 10:33, 6 November 2012 (view source) Jjoerge (Talk | contribs) (→Design) ← Older edit		Revision as of 10:34, 6 November 2012 (view source) Jjoerge (Talk | contribs) (→Related show Commands) Newer edit →
Line 14:		Line 14:
	==Related show Commands==		==Related show Commands==
-	This section provides information you can use to confirm your configuration is working properly after the troubleshooting is complete.
-
-	Certain show commands are supported by the [https://www.cisco.com/cgi-bin/Support/OutputInterpreter/home.pl Output Interpreter Tool (registered customers only)], which allows you to view an analysis of show command output.
-
-	<!--Add steps to verify that the config is working, including which show commands you used-->
-
	==Show running-config==		==Show running-config==

---

Revision as of 10:34, 6 November 2012

Contents 1 Introduction 2 Design 3 Configuration 4 Related show Commands 5 Show running-config 6 Related Information

Introduction

This page provides additional troubleshooting or best practices you might find necessary as you implement a particular function.

Design

Configuration

Related show Commands

Show running-config

Add show running config of your device

Related Information

Technical Support & Documentation - Cisco Systems