Transfer and Connect: A Call Placed from an Analog Phone on an FXS Port Fails
A Call Placed from an Analog Phone on an FXS Port Fails
|Problem Summary||A call placed from an analog phone on an FXS port does not appear to trigger the new_call.vxml application.|
|Possible Cause||There is no application session command defined on the POTS dial-peer for the telephone’s voice port.
Note: This command is necessary to enable phones on FXS ports to run a VXML Server script.
|Recommended Action||On the POTS dial-peer, model your configuration after the following:
dial-peer voice 1000 pots
|Associated CDETS #||None.|