Transfer and Connect: A Call Placed from an Analog Phone on an FXS Port Fails
From DocWiki
(Difference between revisions)
m (1 revision) |
Docwikibot (Talk | contribs) m (Bot: Adding {{Template:Required Metadata}}) |
||
Line 1: | Line 1: | ||
+ | {{Template:Required Metadata}} | ||
== A Call Placed from an Analog Phone on an FXS Port Fails == | == A Call Placed from an Analog Phone on an FXS Port Fails == | ||
Latest revision as of 19:08, 18 December 2009
A Call Placed from an Analog Phone on an FXS Port Fails
Problem Summary | A call placed from an analog phone on an FXS port does not appear to trigger the new_call.vxml application. |
Error Message | None. |
Possible Cause | There is no application session command defined on the POTS dial-peer for the telephone’s voice port.
Note: This command is necessary to enable phones on FXS ports to run a VXML Server script. |
Recommended Action | On the POTS dial-peer, model your configuration after the following:
dial-peer voice 1000 pots application session destination-pattern 12016881000 port 1/0/0 |
Release | Release 7.0(2) |
Associated CDETS # | None. |