The Alarm Service does not start

From DocWiki

Revision as of 09:32, 30 July 2009 by Sansahoo (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The Alarm Service does not start

Problem Summary The Cisco Unified CCX Alarm service does not start.
Error Message None.
Possible Cause AlarmNTService.exe does not exist, or the alarm service is not registered.
Recommended Action

Complete the following steps:

  1. Verify that AlarmNTService.exe exists in the C:\program files\cisco\AlarmService directory. If it does not exist, reinstall the Cisco Unified CCX system. For installation instructions see the Cisco Unified CCX Installation Guide.
  2. Make sure that the Cisco Unified CCX Alarm Service is running. If this service is not running, register this service by typing the following command in a command window:
C:\Program Files\Cisco\AlarmService\AlarmNTService -Service
Release Release 7.0(1)
Associated CDETS # None.

Rating: 0.0/5 (0 votes cast)

Retrieved from "http://docwiki.cisco.com/wiki/The_Alarm_Service_does_not_start"
Personal tools