Syslog messages not received by receiver

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Syslog messages not received by receiver)
m (Bot: Adding {{Template:Required Metadata}})
 
(One intermediate revision not shown)
Line 1: Line 1:
 +
{{Template:Required Metadata}}
== Syslog messages not received by receiver ==
== Syslog messages not received by receiver ==

Latest revision as of 18:38, 18 December 2009

Syslog messages not received by receiver

Problem Summary Your NMS does not receive Syslog messages.
Error Message None.
Possible Cause There is a misconfiguration in the service properties. For more information, refer to the Syslog Support section in Part I: Serviceability.
Recommended Action

Perform the following actions on the Cisco Unified CCX server:

  1. Choose Start > Settings > Control Panel > Administrative Tools > Services and verify that the Cisco Unified CCX Alarm Service is running.
  2. Verify that the Cisco Unified CCX Alarm Service is receiving messages: Open the AlarmService.ini file and verify that the correct port number is listed. The default port is 1444. Open the Alarm Service error logs, AlarmTracen.log, where n indicates the log number. (For example, AlarmTrace11.log is the eleventh log.)
  3. Verify the settings on the Syslog receiver (the NMS system).
Release Release 7.0(1)
Associated CDETS # None.

Rating: 0.0/5 (0 votes cast)

Personal tools