Software installation/upgrade page under OS Admin, stuck in running state after COP installation

From DocWiki

(Difference between revisions)
Jump to: navigation, search
(Created page with "== Software installation/upgrade page under OS Admin, stuck in running state after COP installation == {| border="1" |- ! '''Problem Summary''' | Software installation/upgrade p...")
m (1 revision)
 

Latest revision as of 18:54, 6 July 2012

Software installation/upgrade page under OS Admin, stuck in running state after COP installation

Problem Summary Software installation/upgrade page under OS Admin, stuck in running state after COP installation
Error Message Status is stuck in running state even after completion of COP installation.
Possible Cause As part of COP install script tomcat is stopped and started , this causes the status stuck in starting state.
Recommended Action No harm as long as a second COP needs to be installed. Reboot the box if there is need to install second COP.COP has to be installed from CLI henceforth to avoid this issue.
Release UCCX 8.0(1)
Associated CDETS #

Rating: 5.0/5 (1 vote cast)

Personal tools